尺寸：210*145ＭＭ 80克书纸 黑白印刷
Mini Projector User’s Guide for Model PJ609B v2294-01 For the most up-to-date version of this User’s Guide, go to www.gpx.
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• If the air vents become clogged or dirty, use a vacuum or air compressor and nozzle to clean. Do not use canned air, as the gas may leave a residue inside the enclosure. • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
Table of Contents Overview Features - 5 Includes - 5 Projector Features & Inputs - 6 Remote Functions - 8 Batteries - 8 Menu Options Picture Menu - 9 Sound Menu - 10 Options Menu - 11 Projector Setup Power - 12 Projector Placement - 12 Angle Adjustment - 12 Viewing Options - 13 Image Adjustment - 13 Ceiling Mount - 14 Connecting to Other Devices Pairing to Bluetooth Wireless Speakers or Sound Bar - 15 HDMI - 15 Audio/Video Input - 16 Computer Video (VGA) - 17 External Audio - 18 MicroSD & USB Storage D
Overview Features • Supports 480p, 720p, 1080i, 1080p • Native Resolution: 1280 x 720 (720p) Includes • Remote control: requires 2 AAA batteries (not included) • Aspect Ratio: 16:9, 4:3 LB • 3.5mm to 3 x RCA audio/video cable • Brightness : 150 ANSI lumens • AC/DC power adapter • Bluetooth wireless • User's Guide • I/O: 2 x HDMI, VGA PC, USB, MicroSD card, AV, 3.5mm Headphone Jack • 30˝ to 150˝ viewable screen size • Display distance: 3.3-16.4 ft.
Projector Features & Inputs 1 2 3 4 VGA IR 5 6 9 7 10 8 11 1. Projector Lens 6 8. MicroSD Card Port 2. Front Remote Sensor 9. DC Power Port 3. Angle Adjustment Knob 10. USB Port 4. PC VGA Input 11. HDMI Input 1 & 2 5. Rear Remote Sensor 12. Focus Adjustment 6. 3.5mm Audio Output 13. Keystone Adjustment 7. 3.5mm AV Input 14.
12 13 MENU 14 SOURCE EXIT Power Menu Press to access on-screen menu(s) and options. Press to power on the projector. MENU Press and hold to power OFF. Exit Source Press to change media source mode. SOURCE EXIT Press to return to a previous page or setting in the onscreen menu(s). Arrows/OK Press to navigate on-screen menu(s) and make selections.
Remote Functions Mute Press to mute volume. Power Press to power ON. Press to power OFF. Back / Fwd Press to search through an individual chapter or track. Previous / Next Press to skip between chapters or tracks. FLIP Stop Press to stop playback. VOL – Flip Press to flip display image 180°. VOL + SOURCE Play/Pause Press to play or pause an individual chapter or track. Go To/Number Keypad Press to enter specific chapter or track numbers. Press Play when ready.
Menu Options Change projector settings by pressing the Menu button and selecting the Setup icon. Note: Not all settings are user adjustable. Picture Menu Picture Mode Contrast Brightness Color Sharpness Tint Color Temperature Aspect Ratio Noise Reduction Screen Select Menu Standard 50 50 50 50 50 Medium Auto Middle Adjust 1. Picture Mode Select Vivid, User (custom), Soft, or Standard. 2. Contrast, Brightness, etc. Set Picture Mode to "User" to adjust these settings. 3.
Menu Options Sound Menu Sound Mode Treble Bass Balance Surround Sound Select Menu 1. Sound Mode Select Music, Movie, User (custom), Sports, or Standard. 2. Treble & Bass Set Sound Mode to "User" to adjust these settings. 3. Balance Adjust the audio balance. 4. Surround Sound Turn Surround Sound ON or OFF.
Options Menu OSD Language BlueTooth Restored Factory Default Panel Rotate Select Menu English off 0 Adjust 1. OSD Language Select English, French, or Spanish for the On Screen Display. 2. Bluetooth Turn Bluetooth ON or OFF. 3. Restore Factory Default Reset the projector and restore all of the default settings. 4. Panel Rotate Flip and mirror the screen image.
Projector Setup Power Plug the AC/DC power adapter (included) into a standard wall outlet and the DC power input on the rear of the unit. After connecting power, please allow approximately 5 seconds to pass before powering the unit ON. Projector Placement For best results, place the projector in a dark room or other dimly lit area. The projector will display a screen size from 30˝ to 150˝. Adjust the projector angle and distance to best suit your needs.
FRONT TABLE Viewing Options The projector can be used to project onto a wall or screen. It can be mounted from a ceiling or placed on a table. Be sure to aim the remote at the sensor on the front or rear of the projector. See page 6 for sensor locations on the FRONT CEILING projector. When projecting from the rear position, a special screen will be needed (not included) to display the image.
Projector Setup Ceiling Mount To mount the projector from the ceiling, you will need mounting hardware as recommended by a professional. Mounting hardware and instructions are not included. Before mounting, be sure the ceiling structure can support the weight of the projector and the mount itself. It is recommended to have this unit mounted by a professional.
Connecting to Other Devices Pairing to Bluetooth Wireless Speakers or Sound Bar NOTE: Bluetooth is OFF by default when the projector first powers ON. Bluetooth can be turned ON or OFF from the OPTIONS Menu. 1. Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to which you wish to connect. Devices such as smartphones, tablets, or computers are not Bluetooth receivers and will not connect to the projector.
Connecting to Other Devices Audio/Video Input Requires a 3.5mm to RCA audio/video cable (included). 1. Connect the 3.5mm to RCA audio/video cable to the AV input on the unit. 2. Connect the 3.5mm to RCA audio/video cable to the RCA stereo audio outputs and composite video output on the media player. 3. Set the projector's Source to AV and use the controls on the connected player to select and play media. AV IN R AUDIO OUT L VIDEO VIDEO OUT Connect AV cable (included) to media player's AV outputs.
Computer Video (VGA) Note: VGA connections do not support audio. You will need to use the computer's speakers to hear audio. Requires a VGA cable (not included) and a desktop PC or laptop with a VGA output. 1. Using a VGA cable, connect the VGA input on the projector to the VGA output on your computer. 2. Set the projector's Source to PC and use the controls on the computer to select and play media.
Connecting to Other Devices External Audio Requires a 3.5mm to RCA audio/video cable (included). Note: Speakers must have their own power supply. 1. Using a 3.5mm to RCA stereo cable (included), connect the external powered speakers to the Headphone Jack on the projector. Note: The yellow video plug will not be needed in this setup and will not need to be connected. 2. The projector will automatically detect the connection and send audio signal to the speakers.
Customer Support Contact Information Website: www.gpx.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Made Green Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.gpx.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.
20
