Flat Panel Television User Manual

ManualsBrandsGPX ManualsFlat Panel TVTD3220

USER’S GUIDE

V:1358-0910-10

For the most up-to-date version of this User’s Guide, go to www.gpx.com

TD3220

32” Class HDTV with DVD

Summary of content (16 pages)

PAGE 1
USER’S GUIDE V:1358-0910-10 TD3220 32” Class HDTV with DVD For the most up-to-date version of this User’s Guide, go to www.gpx.
PAGE 2
Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Avertissement: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
PAGE 3
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PAGE 4
32” Class HDTV with DVD Features Included • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 32” LCD display ATSC/NTSC tuner Electronic program guide Aspect ratio: 16:9 Resolution: 1366 X 768 HD ready Viewing angle: 140 (H) x 160 (V) Contrast: 4000:1 Brightness: 450cd/m2 Response time: 8ms Color: 16.
PAGE 5
Table of Contents 32” Class HDTV with DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features Included Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
Introduction SD/MMC/ MS MEMORY CARD SLOT DISC DRIVE USB PORT VOLUME Press to adjust the volume. CHANNEL Press to adjust the channel. REPEAT Press to repeat a title, chapter, track, or entire disc. EJECT Press to eject a loaded disc from the DISC DRIVE. PLAY/PAUSE Press to play or pause the loaded disc. REPEAT / / SKIP/SEARCH Press to skip between chapters or tracks. Press and hold to search through an individual chapter or track. STOP Press to stop a loaded disc during play.
PAGE 7
HDMI INPUTS 3.
PAGE 8
continued Introduction EJECT Press to eject a disc from the DISC DRIVE. NUMBER KEYPAD EJECT POWER DISPLAY Press to view the on-screen display. MUTE 16:9/4:3/FAV LIST Press to adjust the aspect ratio. Press to access your favorites list on the television. PICTURE VOLUME Press to adjust the volume. SOUND SOURCE Press to adjust the source. SLEEP ARROW/ENTER Press to navigate DVD and system menus, and to make selections. VOLUME ZOOM FAV LIST CH LIST ASPECT Press to adjust the aspect ratio.
PAGE 9
Setup Power AC power input: requires an AC power cable (included) HDMI 1 2 VIDEO INPUT 3 PC AUDIO VGA/PC IN AUDIO OUT AUDIO IN Y2 Pb2 Pr2 R2 L2 R Y1 Pb1 Pr1 R1 L1 VIDEO L TV ANTENNA AC IN Remote Power Remote control: requires 2, AAA-size, batteries (included) OPEN Connecting the Stand Requires stand, 1 machine screw, and 4 selftapping screws (all included) 1. Insert the stand into the bottom of the television. 2.
PAGE 10
Television Setup Connecting a TV Antenna Connecting Basic Cable Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF INPUT on the television. 1. Connect a cable to the RF INPUT on the television. 2. Press the SOURCE button to switch to TV mode. 2. Press the SOURCE button to switch to TV mode. 3. Press the MENU button to access the setup menu. 3. Press the MENU button to access the setup menu. 4.
PAGE 11
Television Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the SOURCE button to switch to TV mode. 2. Press the MENU button to access the setup menu. 3. Press the ARROW () buttons to highlight the CHANNEL icon. Press the ENTER button. 4. Press the ARROW () buttons to highlight SIGNAL TYPE. Press the ARROW () buttons to select AIR. 5. Press the ARROW () buttons to highlight AUTO CHANNEL SEARCH.
PAGE 12
continued Television Setting the Clock Television Menu 1. Press the MENU button to access the setup menu. Press the MENU button to access the TV menu. Press the EXIT button to exit the TV menu. 2. Press the ARROW () buttons to highlight the SETUP icon. Press the ENTER button. 3. Press the ARROW () buttons to highlight CLOCK. Press the ENTER button. 4. Press the ARROW () buttons to highlight TIME ZONE. Press the ARROW () buttons to select your current time zone. 5.
PAGE 13
DVD and CD Loading a DVD or CD DVD Setup Menu Contents 1. Gently insert a DVD or CD into the slot-load disc drive, with the label side of the DVD or CD facing the back of the television. In DVD mode, press the DVD SETUP button to access the DVD setup menu. Press the DVD SETUP button to exit the DVD setup menu. Once a DVD or CD is loaded into the television, the TV will automatically switch to DVD mode. Playing a DVD or CD 1. Follow the instructions for Loading a DVD or CD. 2.
PAGE 14
USB and Memory Card Reader Connecting a Memory Card 1. Load an SD, MS, or MMC memory card into the MEMORY CARD READER as shown in the image to the right. Using a Connected Memory Card MMC 1. Follow the instructions for Connecting an SD or MMC card. SD 3. Press the USB/SD button on the remote to switch to the connected memory card. 4. Use the ARROW and ENTER buttons to select and play content from the connected memory card. MS 2. Press the SOURCE button to switch to DVD mode.
PAGE 15
Connecting Other Devices Connecting a Set-Top Box Connecting a DVD Player or VCR • • • • You will need: a set-top box, s-video and RCA stereo cables or composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable. (not included) Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television. Power the television on and press the SOURCE button to switch to the connected input.
PAGE 16
Company Information International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.gpx.com. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 Email: prodinfo@gpx.com Parts Email: partsinfo@dpi-global.com Website: www.gpx.