USER’S GUIDE V:1437-0819-09 TD910B TV with DVD Player For the most up-to-date version of this User’s Guide, go to www.gpx.
WARNINGS AND PRECAUTIONS • • • • • • • • • • • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
TV WITH DVD PLAYER TABLE OF CONTENTS Features • 9” TFT TV with Built-In DVD Player • Built-In Speakers • Built-In Digital Tuner • Full-Feature Remote Control • Aspect Ratio: 4:3/16:9 • Mute Function • Resolution: 640(H)x234(V) • • Contrast: 500:1 Uses ‘CR2025’ Button Cell Battery, battery included • Brightness: 220 nits • AC/DC-Powered: • Multi-Language OSD: On-Screen Display in English, French & Spanish • AC: AC/DC Adaptor, Dual Voltage 100-240V/50-60Hz • Thin Profile, Portable
PICTURE Press to adjust the picture mode. INTRODUCTION SOUND Press to adjust the sound mode. POWER GUIDE Press to access the television guide. DISC/USB/SD Press to switch between DVD, USB, or SD Card mode. DISPLAY MENU Press to access the setup menu. VOLUME (+/-) SOURCE Press to switch between TV and DVD mode. MUTE POWER POWER BUTTON CHANNEL (+/-) Press to change the channel and navigate menus. AV OUTPUT ENTER Press to make selection in the menus.
SETUP AC Power Included TV Stand Plug the included AC/DC adapter into the POWER INPUT and a standard AC power outlet to power the TV with DVD Player. Connect the included TV stand to the bottom of the TV with DVD player as shown in the image to your left. The stand can be removed by holding down the TV stand and pulling up on the TV with DVD player. WARNING: Do not hold, carry, or move the TV with DVD player by the TV stand only. Always grab a hold of the main unit firmly when moving.
TELEVISION 10 Auto Scan Favorites NOTE: THIS OPERATION MUST BE FOLLOWED BEFORE THE TV WITH DVD PLAYER CAN BEGIN RECEIVING TELEVISION CHANNELS. THE RF ANTENNA MUST BE CONNECTED BEFORE FOLLOWING THIS OPERATION. 1 Adjust the POWER SWITCH on the side of the unit to the “ON” position. 2 Press the POWER BUTTON on the front of the TV with DVD Player. 3 Press the SOURCE button, switch to TV mode, and press the ENTER button. 4 Press the MENU button on the TV with DVD player to access the television menu.
DVD & CD DVD SETUP MENU Loading a DVD or CD DVD Setup Menu Open the DVD DOOR, and load a DVD or CD into the TV with DVD player (label side facing out). To access the DVD setup menu, press the SOURCE button to switch to DVD mode, then press the SETUP button on the remote.
MEMORY CARD SLOT & USB (THUMB DRIVE) CONNECTION AV OUTPUT Connecting to a Television Loading a MMC, SD, or MS Card MS Requires a 3.5mm mini-phono to composite A/V cable (included). 1 Connect the 3.5mm mini-phono plug into the AV OUT on the TV with DVD player. 2 Connect the composite A/V plugs to the audio and video inputs on a television. 3 Adjust the television to the appropriate input setting to receive audio and video from the portable DVD player.
COMPANY INFORMATION Green Initiative Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’ 2009 marks the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI and its four brands, iLive, WeatherX, Capri, and GPX, are building upon environmental initiatives introduced at all of their facilities to help formulate and sustain significant and important conservation efforts within its manufacturing and marketing communities.
