USER’S GUIDE V:1706-0830-10 TDE1380 13” HDTV with DVD For the most up-to-date version of this User’s Guide, go to www.gpx.
Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Avertissement: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
13” Class HDTV with DVD Table of Contents Features Included • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 13.3” LED display ATSC/NTSC tuner Electronic program guide Aspect ratio: 16:9 widescreen Resolution: 1280 x 800 TV supports: 480p, 480i, 720p, 1080i, 1080p Viewing angle: 40˚ (H) x 50˚ (V) Contrast: 500:1 Brightness: 200cd/m2 Response time: <12ms Color: 16.
POWER Press to power the television off or on. Introduction MENU Press to access the television menu. VOLUME Press to adjust the volume. POWER Press to power the television off or on. CHANNEL Press to adjust the television channel. SOURCE Press to adjust the television source. HDMI 1 DISC DRIVE HDMI INPUTS HDMI 2 / / VIDEO 1 COMPOSITE VIDEO INPUT 2 STEREO HEADPHONE JACK GPX RCA AUDIO INPUT 1 RCA AUDIO INPUT 2 USB PORT For firmware upgrades only.
Setup Television Setup Power Connecting a TV Antenna Connecting Basic Cable Plug the included AC power cable into the DC POWER INPUT on the television and an AC power outlet to power the television. Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF INPUT on the television. 1. Connect a cable to the RF INPUT on the television. 2. Press the SOURCE button to switch to TV mode. 2. Press the SOURCE button to switch to TV mode. 3.
Television Auto Scanning for Channels Setting the Clock Television Menu The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the SOURCE button to switch to TV mode. 1. Press the MENU button to access the setup menu. Press the MENU button to access the TV menu. Press the EXIT button to exit the TV menu. 2. Press the MENU button to access the setup menu. 3. Press the ARROW () buttons to highlight the CHANNEL icon. Press the ENTER button. 4.
DVD and CD Memory Card Slot and USB Port DVD Setup Menu Connecting a Memory Card 1. Gently insert a DVD or CD into the slot-load disc drive, with the label side of the DVD or CD facing the back of the television. In DVD mode, press the DVD SETUP button to access the DVD setup menu. Press the DVD SETUP button to exit the DVD setup menu. 1. Load an SD, MS, or MMC memory card into the MEMORY CARD READER as shown in the image to the right.
HDMI 2 HDMI 3 • • • HDMI 1 HDMI 2 HDMI 3 VIDEO 1 Composite 2 and RCA Stereo You will need: a gaming device, s-video and RCA stereo cables or composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable. (not included) Connect the gaming device’s audio and video outputs to the corresponding audio and video inputs on the television. Power the television on and press the SOURCE button to switch to the connected input.
Company Information International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.gpx.com. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 Email: prodinfo@gpx.com Parts Email: partsinfo@dpi-global.com Website: www.gpx.