USER’S GUIDE V:1647-0816-10 TE1380 13” HDTV For the most up-to-date version of this User’s Guide, go to www.gpx.
Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Avertissement: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
13” HDTV Features Included • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 13.3” LED display ATSC/NTSC tuner Electronic program guide Aspect ratio: 16:9 widescreen Resolution: 1280 x 800 TV supports: 480p, 480i, 720p, 1080i, 1080p Viewing angle: 40˚ (H) x 25˚ (V) Contrast: 500:1 Brightness: 200 cd/m2 Response time: <16ms Color: 16.7 million V-chip Closed captioning Multi-language OSD: English, French, Spanish Sleep timer USB port, 2.
Table of Contents Warnings and Precautions . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . 3 • • FCC Warnings Additional Warnings 13” HDTV . • • Features Included . . Introduction. Setup. • • • . Power Remote TV Stand . . . . . Television Setup . • • • . . . . . . . . . . . . . . . Connecting a TV Antenna Connecting a Set-Top Box Connecting Basic Cable . . . . . . . . . . . . .
Introduction MENU Press to access the television menu. POWER Press to power the television off or on. VOLUME Press to adjust the volume. CHANNEL Press to adjust the television channel. SOURCE Press to adjust the television source. DC POWER INPUT USB PORT Use for connecting a thumb drive or for software updates.
POWER Press to power the television off or on. MUTE Press to mute the volume. NUMBER KEYPAD SLEEP Press repeatedly to set the sleep timer. After the set time has expired the television will automatically power off. PREV In TV mode, press to switch to the previous channel. ASPECT Press to adjust the aspect ratio between FULL, NORMAL, WATERGLASS, and CINEMA. FREEZE Press to freeze or unfreeze the current frame in TV mode. PICTURE Press to adjust the picture between STANDARD, MOVIE, USER, and DYNAMIC.
Setup Power DC power input: requires an AC/DC power adapter (included). Plug the included AC/DC power adapter into the DC POWER INPUT and a standard AC power outlet to power the television. Remote Requires 2, AAA size, batteries (included) OPEN TV Stand Requires TV stand and screws (included). The TV stand can be removed allowing you to mount the TV onto a wall. When removing or attached the TV stand, use a philips-head screwdriver to loosen or tighten the screws.
Television Setup Connecting a TV Antenna Connecting Basic Cable Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF INPUT on the television. 1. Connect a cable to the RF INPUT on the television. 2. Press the SOURCE button to switch to TV mode. 2. Press the SOURCE button to switch to TV mode. 3. Press the MENU button to access the setup menu. 3. Press the MENU button to access the setup menu. 4.
Television Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the SOURCE button to switch to TV mode. 2. Press the MENU button to access the setup menu. 3. Press the ARROW () buttons to highlight the CHANNEL icon. Press the ENTER button. 4. Press the ARROW () buttons to highlight SIGNAL TYPE. Press the ARROW () buttons to select AIR. 5. Press the ARROW () buttons to highlight AUTO CHANNEL SEARCH.
Television Setting the Clock Television Menu 1. Press the MENU button to access the setup menu. Press the MENU button to access the TV menu. Press the EXIT button to exit the TV menu. 2. Press the ARROW () buttons to highlight the SETUP icon. Press the ENTER button. 3. Press the ARROW () buttons to highlight CLOCK. Press the ENTER button. 4. Press the ARROW () buttons to highlight TIME ZONE. Press the ARROW () buttons to select your current time zone. 5.
Connecting Other Devices (Set-Top Box, Gaming Device, DVD Player, VCR, or PC) Connecting a Set-Top Box • • • Composite and RCA Stereo You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable. (not included) Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television. Power the television on and press the SOURCE button to switch to the connected input.
VGA/PC INPUT PC Audio Input Connecting a Computer • • • • Customer Support: 1-888-999-4215 You will need: a PC with a VGA output, and a VGA cable. (not included) Connect the computer’s VGA output to the VGA/PC INPUT on the television. Power the television on and press the SOURCE button to switch to the PC Mode. Audio from the connected PC can be input to the television through the TV’s PC Audio INPUT by using a 3.5mm audio cable (not included).
USB Port Connecting a USB Thumb Drive 1. Load a USB thumb drive into the USB PORT as shown in the image to the right. Using a Connected USB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the SOURCE button to switch to Media mode. 3. Use the ARROW and ENTER buttons to select and play content from the connected USB thumb drive. 4. Press the EXIT button to return to the media menu. The USB port can also be used to upgrade the televisions firmware.
Customer Support: 1-888-999-4215 GPX 15
Company Information International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.gpx.com. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 Email: prodinfo@gpx.com Parts Email: partsinfo@dpi-global.com Website: www.gpx.
