Installation Instructions

101
www.grabberman.com
“The Professional’s Choice”
TM
A 100% Employee Owned Company
Product #252
Thin Wafer Head DRIVALL
®
Winged Self Drilling (1 OF 2)
APPLICATIONS
 Attaching 3/16” to 3/4” plywood to 14 to 16 gauge steel
SPECIFICATIONS
 Gauge – #10
 Length – 1-7/16”
 Head Type – Wafer
 Thread Type – Single Lead
 Recess Type – #2 Phillips
 Finish – Clear Zinc
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICCFS ES ER #5280.
PRODUCT FEATURES
 24 Threads per inch
 Superfast #3 drill point
 Thin Wafer head provides a flush finished surface
 Winged point creates pilot hole through the plywood
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum and
RPM range of 0 to 2,500.
 The Wafer head is fully seated when the head is flush with the work surface.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
 The fastener must penetrate beyond the metal a minimum of three
thread pitches.
Self drilling fastener for attaching 3/8” to 1” plywood or wood to 14 – 20 gauge steel
Finish - Clear Zinc and GRABBERGARD
®
Heavy Gauge Metal (18 or thicker)