Installation Instructions

63
www.grabberman.com
“The Professional’s Choice”
TM
A 100% Employee Owned Company
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#6 8.00 0.50 #2 2.68 2.27 3.45 15
8.50 0.80 2.72 2.42 3.58
#7 8.00 0.50 #2 2.93 2.40 3.75 15
8.50 0.80 2.97 2.55 3.90
#8 8.00 0.50 #2 3.18 2.80 4.08 15
8.50 0.80 3.22 3.00 4.20
#10 8.50 0.50 #2 3.78 3.20 4.75 12
8.90 0.80 3.82 3.40 4.95
PULL-OUT TEST DATA
Screw Gauge Metal Gauge Tension (lbs.) Shear (lbs.)
#6 20 237 557
25 139 278
#7 20 222 817
25 100 245
#8 20 342 785
25 145 325
#10 20 392 418
25 171 358
**GRABBER
®
fasteners are not categorized as structural bolts. The figures listed above
are ultimate average values achieved under independent laboratory conditions, and apply
to GRABBER Line fasteners only. An appropriate safety factor must be determined by a
qualified professional for design purposes.
Product #212
Bugle Head STREAKER
®
(3 OF 3)
Light Gauge Metal (20-25)
SHEET STEEL GAUGES
Gauge No. Decimal Equivalent Millimeter Equivalent
20 0.0396” 1 mm
25 0.0188” .6 mm
All GRABBER
®
screw products are manufactured in facilities that are ISO 9002 and ISO 1401 certified and
approved. The fasteners comply with SAE J78 and ASTM C1002, as referenced in ICCFS report ER-5280,
and are approved for use by the Uniform Building Code. ©2012 GRABBER Construction Products,
Inc. GRABBER
®
, STREAKER
®
, DRIVALL
®
, LOX
®
, GRABBERGARD
®
and SCAVENGER
®
are registered
trademarks of Grabber Construction Products, Inc.