Installation Instructions

46
GRABBER Construction Products
“The Professional’s Choice”
TM
A 100% Employee Owned Company
STANDARD CORROSION TEST RESULTS
Finish Test Standard/Protocol Results
GRABBERGARD Salt Spray ASTM B117 1,000 hours,
Results No Red Rust
GRABBERGARD Kesternich DIN 50018, 2.0L 15 cycles,
Results No Red Rust
PULL-OUT TEST DATA
Gauge 2x2 2x4 1x3 1” Plywood 3/4”
Douglas Fir Redwood Clear Pine Particleboard
#6 339 309 18 222 224
#7 430 258 291 250 227
#8 528 500 396 246 324
#10 545 320 332 312 255
**GRABBER fasteners are not categorized as structural bolts. The figures listed above are
ultimate average values achieved under independent laboratory conditions, and apply to
GRABBER Line fasteners only. An appropriate safety factor must be determined by a
qualified professional for design purposes.
EXTERIOR WOOD
Product #230X
Bugle Head GRABBER (3 OF 3)
All GRABBER
®
screw products are manufactured in facilities that are ISO 9002 and ISO 1401 certified and
approved. The fasteners comply with SAE J78 and ASTM C1002, as referenced in ICCFS report ER-5280,
and are approved for use by the Uniform Building Code. ©2012 GRABBER Construction Products,
Inc. GRABBER
®
, STREAKER
®
, DRIVALL
®
, LOX
®
, GRABBERGARD
®
and SCAVENGER
®
are registered
trademarks of Grabber Construction Products, Inc.