Specification

33
INTERIOR WOOD
APPLICATIONS
 3/8”, 1/2”, and 5/8” single-layer gypsum board to wood studs and joists
 1/2” and 5/8” double-layer gypsum board to wood studs and joists
 Insulation to wood
SPECIFICATIONS
 Gauge – #6 to #10
 Lengths – 1” to 4”
 Head Type – Scavenger
®
 Recess Type – #2 Phillips
 Thread Type – Single Lead
 Finish – Gray Phosphate.
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICCES ER-5280.
PRODUCT FEATURES
 Superior holding power and ease of penetration
 A coarse thread screw for general interior applications
 8 threads per inch
 Extra sharp, single lead 23° GRABBER point, designed to penetrate quickly
and easily
#2 Phillips recess drive
Unique Scavenger
®
head is designed to reduce paper burrs
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum
and 2500 RPM.
 The Scavenger
®
head is fully seated when the head is flush with the work
surface.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
Product #230S
Scavenger
®
Head GRABBER
®
- Interior (1 OF 3)
Attaches gypsum board to wood. Extra sharp point and threads make driving
easier and provide better holding power.
Finish - Black/Gray Phosphate