Specification

140
Cement Board
Product #268
GRABBER
®
Cement Board Screws Self Drilling (1 OF 2)
APPLICATIONS
 Cement board to Metal
SPECIFICATIONS
 Gauge - #8
 Length – 1-1/4” to 2-1/4”
 Head Type – Thin Wafer
 Recess Type – #2 Phillips
 Thread Type – Single Lead
 Finish –GRABBERGARD
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICC ESR report
ESR-1271.
PRODUCT FEATURES
 Exterior grade corrosion
 Wafer head with nibs to facilitate seating and minimize strip out
 Head diameter - .40 inch
 #2 Phillips recess drive
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum and
RPM range of 0 to 4,000.
 Install with head flush with board, no need to counter sink.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
GRABBER Cement Board and High Density Sheathing Screws have been specifically designed for use with
Cement board and High density exterior sheathing. These exterior grade corrosion resistant fasteners
have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. GRABBER
Cement Board Screws are used for the attachment of these boards to steel from 20-12 gauge.
Finish - GRABBERGARD