Specification

65
Light Gauge Metal (20-25)
Product #212
Bugle Head STREAKER
®
(1 OF 3)
APPLICATIONS
 1/2” and 5/8” single-layer gypsum board to steel studs and track
 1/2” and multiple-layer gypsum board to steel studs and track
 Steel or wood cabinets through single-layer gypsum board to steel studs,
20 – 25 gauge
 OSB or plywood to 20 – 25 steel
SPECIFICATIONS
 Gauge – #6 to #10
 Length – 1” to 6”
 Head Type – Bugle
 Recess Type – #2 Phillips
 Thread Type – Double Lead
 Finish – Gray Phosphate
 GRABBER
®
screws are manufactured in a ISO 9002 and ISO 14001 certified
and approved factory, and are approved by ICCES report ER-5280.
PRODUCT FEATURES
 A fine-thread screw for general interior applications
 Ideal for use with 20 and 25 gauge steel 12 – 15 threads per inch
 Super sharp, 23° STREAKER
®
Point, designed to penetrate steel quickly and
easily
#2 Phillips recess drive
 The Bugle head is designed to seat fast and easily into soft wood or drywall,
creating a flush surface finish.
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specifications for optimal performance – 4 amps minimum and
RPM range of 0 – 4000.
 The bugle head is fully seated when the head is flush with the work surface.
 Overdriving may result in failure of the STREAKER
®
or stripout of the
work surface.
 The STREAKER
®
must penetrate beyond the metal a minimum of three
thread pitches.
Attaches gypsum board or wood to wood or 25-20 ga. steel or wood. Standard
bugle head.
Finish - Black/Gray Phosphate, Clear Zinc and GRABBERGARD
®