Owners Manual

Hanging Arrays

For applications that require hanging a microphone array from a ceiling, the SB-HB hanging

bar can be used. The SB-HB can be used with the SB-SUR surround tree, SB-DT Decca tree,

and the SB-100 AB bar. The SB-HB has a 1 inch eye-bolt on one end and threads into the

SB-SMA stand mount adapter at the other. The SB-HB can be ordered in two versions:

1. SB-HB-1M with a guide line yoke sized for 1 meter wide bars.

2. SB-HB-2M with a guide line yoke sized for 2 meter wide bars.

fig. 6: Decca Tree with SB-HB Hanging Bar

Setup Basics

SB-AMH/SB-MH

All of the modular microphone holder assemblies use adjustable clamping handles to tighten

and loosen the holder from the tube it is mounted on. Turning the handle clockwise will tighten

or “clamp” the holder in position on the tube. The clamping action is very secure and does not

require extreme torque on the handle. As well, the final position of the handle can be adjusted

by pulling on the handle while rotating. This allows the handle to be adjusted so that it can be

at a convenient angle for tightening or loosening.

Spacebar Modular System User Manual Revision C Page 12 of 29

SB-HB HANGING BAR

GUIDE LINE YOKE

HANGING CABLE

VERTICAL ANGLE ADJUST