Owners Manual

fig 11. Guide Line Yoke
The ends of the yoke guide lines attach to the s-hooks on the ends of whatever bar is being
used. The s-hooks (supplied with your Spacebar system) must be mounted to the end plugs
of the tube with the supplied #10-32 x 1/2” button head cap screw. Use a 1/8” hex wrench.
Do not tighten the screw so much that it binds the s-hook. The screw has a thread locking
compound applied to its threads so it will not loosen after screw is installed.
Spacebar Modular System User Manual Revision C Page 16 of 29
MONOFILAMENT
LINE
SWIVEL
TO ANCHOR
POINT
TO SPACEBAR ENDS
SHRINK TUBING