User`s guide

Steps to Connect Your Radio to Your Wireless

Network

Getting Started

Step 1 - Power up the radio

To power your radio connect the AC Power on the back of your MICRO SYSTEM to a wall power outlet.

The radio can be switched on and off with the STANDBY/ON button.

Once powered on, the display on the front of the radio will light up and show:

Grace Digital Radio

After a few seconds, the screen will change to show :

Initializing

Network

After a few seconds, the screen will change to show:

Scan for networks

Enter network

View Config

Edit Config

Step 2 - Scan for a wireless network connection

When the display show <Scan for networks>, press the „Select‟ button. (NOTE: IF you make an error at

any point, press the „Back‟ button to return the previous screen)

The MICRO SYSTEM will now scan for all available wireless networks and will display: