User’s Guide ____________________________________________ Mini-Bullets II Wireless 900MHz Speaker System Mini-Bullets II 900MHz Wireless Speaker System Model: GDI-AQBLT300 /AQBLT31
IMPORTANT: Please read your User’s Guide before using your system INTRODUCTION Your MINI-BULLETS II speaker is designed using the latest wireless technology to enjoy audio anywhere inside or outside your home. Simply connect the desired audio source (Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player) to the speaker transmitter. IMPORTANT SAFETY INSTRUCTIONS 1. Read & keep these instructions. 2. Keep these instructions. 3. Follow all warnings and cautions 4. Do not use this apparatus near water. 5.
FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Automatic PLL (Phases Lock Loop) scanning system on speaker receivers. PLL (Phase Lock Loop) transmitter transmission system.
1. Batteries Compartment 3. Handle 2. DC IN (power adapter) Jack 4. Auto Tune 5. Volume Up 6. Volume Down 7. Power ON/OFF SET UP TRANSMITTER 1. Connect the AC power adaptor included with your unit to electrical wall outlet. 2. Plug the AC power adaptor included with your unit in the jack located on the rear of the transmitter. Option 4 X “AA” size ALKALINE batteries can be used to power the transmitter for portability.
red POWER LED will illuminate together. If the blue SIGNAL LED does not illuminate, ensure the audio source is turned on and properly connected to the jack. SPEAKER (RECEIVER) 1. Connect the 12V power adaptor to the DC input jack on the bottom of each speaker, then plug into the power wall outlet. You may also insert 6 x ‘AA’ size ALKALINE batteries into the battery compartment. Ensure the batteries polarity (+/-) are correct, at the bottom of the speakers (batteries not included in the package). 2.
When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. The POWER LED will illuminate steadily once connected. Î Keep a distance of the speaker up to 7 meters apart from transmitter, and then press “SCAN” AUTO TUNE button for best tuning reception. Î You should now be able to place the speakers freely from room to room without disruption.
- Ensure the speaker is switch ON. Speaker’s battery capacity is low, connect the AC/DC adaptor to the speaker. Ensure the TV or audio component is ON. The volume of speaker is too low, adjust the volume to an appropriate level. DISTORTED SOUND - Press the “AUTO-TUNE” button on the speakers to find the transmitter frequency - Check there is not Too much water retention inside the speaker grill. Turn over the speaker and let the water drain out from the speaker grill.
P.