VICTORIA By Grace Digital User’s Guide Model No.
User’s Guide Table of Contents IMPORTANT Safety Instructions and Warnings ............................................................................... 4 QUICKSTART Guide ........................................................................................................................ 7 What you need before you can use your Internet radio ............................................................... 7 Contents .....................................................................................
Settings Menu ................................................................................................................................... 28 Choosing desired option from the Configure menu ...................................................................... 28 ........................................................................................................................ 28 ..............................................................................
Important Safety Instructions and Warnings Please read before installation If this Internet radio has been moved from a cold place to a warm place, DO NOT plug it in for 2-3 hours (e.g. from a cold car boot to a warm room). There is a possibility that moisture may have condensed in the Internet radio, this can cause damage to your Internet radio. To avoid damage please unpack your Internet radio and allow it to stand at room temperature for 2-3 hours before use.
WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. The product shall not be exposed to any dripping or splashing. Objects filled with liquids, such as vases, should not be placed on the product. No open flame sources, such as lighted candles, should be placed on the product. Keep the remote control battery away from children. It may cause a fire or chemical bum if mishandled.
ADVISORY FCC Compliance and Advisory Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
QUICKSTART GUIDE - 1st time set up What you need before you can use your Internet Radio: A broadband internet connection is required. A wireless (Wi-Fi) modem or router connected to your broadband (cable or DSL) internet. NOTE: IF your wireless (Wi-Fi) network is password protected (WEP or WPA), please obtain your password before proceeding to Step 1. All passwords are UPPER and lower case sensitive.
the word ‘END’ is in the center of your display. The word ‘END’ is located in front of the beginning of the alphabet. Choose ‘END’ by pressing the large dial inward. The radio will display ‘connecting to ….’, followed by a series of messages. When the radio has successfully connected the main menu will be displayed. If the main menu is not displayed and instead you see a the Clock please push in the ‘Power/Vol’ knob to display the main menu.
Radio connections, controls & remote control functions FRONT PANEL Power / Vol – Push to power unit on / off and turn to change volume Push / Sel – Turn to move through menu and push to select Reply - Display Pandora’s and other interactive menus Preset - Press to display the 12 programmable presets Home – Takes the radio back to the home screen menu Back - Go to the previous menu screen, or delete entry characters
BACK PANEL Master power switch - turns unit on / off AC Power Jack – to connect to AC power adapter USB Port – play music from USB flash drive or use as LAN connection Headset jack – for private listening RCA Component Input Jacks – connect to optional audio devices RCA Component Output Jacks – connect to home audio or other devices WiFi Antenna – (802.11n) built internally inside the cabinet (Ethernet Adapter required for LAN connection.
REMOTE CONTROL Standby / ON BACK Press to return to Menu Quick-key to Main Menu Pandora “Thumbs Down” selection Pandora “Skip Song” selection Pandora “Thumbs Up” selection Mute Volume Up & Volume Down … Preset 1 to 10 Alarm / Timer Play / Pause Stop Next / Previous
Display icons Icons are displayed on the bottom row of the LCD display. The meanings of these icons are explained below: ‘Internet Radio’ mode and is playing a live stream Mute indicator Sleep timer Alarm-set indicator ‘Media Player’ mode.
Steps to Connect Your Radio to Your Wireless Network Getting Started Step 1 - Power up the radio To power your radio connect the AC Power on the back of your Nostalgic Radio to a wall power outlet and turn the master power switch on the back. Then the radio can be switched on and off with the Power / Vol button on the front of the radio.
Scanning IIIIIIIIIIIIIIIIIII IF the radio does not find a wireless network router, the display will show: No networks Found If this happens after subsequent attempts you should setup your wireless access point working - see the instructions supplied with your wireless network.
then: Network OK IF the screen displays either WEP or WPA, a password is required: Enter WEP key OR Enter WPA key Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA or WPA2). You therefore need to enter the correct WEP or WPA password on your NOSTALGIC RADIO to communicate with your network. Only the person who set up the network in the first place knows this password; if that person is not you then you need to find out the password.
Once the password is entered correctly, your NOSTALGIC RADIO will now be able to connect to the network. Your radio will connect to the selected network without having to re-enter a password. Your password will be saved in your Grace radio even if a power outage occurs. NOTE: IF you would like to give your radio a static IP address then please see the ‘Network config’ section under the ‘Setting’ section. Choosing a radio station to listen to 1. Press the ‘’Home’ button to bring up the main menu.
4. Press the ‘Select’ button. 5. Turn the knob until the display shows the station you want. 6. Press the ‘Select’ button and wait until the radio connects to that station. Note that some radio stations do not broadcast 24 hours per day, and some stations are not always on-line. If this station has on-demand content (that is, it gives the option of listening to programs which have already been broadcast), see “Stations which enable you to choose what you listen to”. 1.
Changing the volume When a radio station is playing increase the volume by turning the Power /Vol knob clock wise. Storing a radio station in a preset Preset on Radio When a station is playing, press the ‘preset’ button then turn the Push/Sel knob until the preset you want to set is highlighted (12 stations can be saved on the radio’s presets).
Please note that some radio stations do not pass the audio stream quality test so we are not able to add every request. Typically we can add a station within 10 business days if the station provides us a quality stream. You can check back on our web site periodically to see if the station has been added.
Setting the clock 1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.) 2. Turn the knob until the display shows < Media Player Alarm Clock Settings > 3. Press the ‘Select’ button. 4. Turn the knob until the display shows < Register Clock Setup Sleep Timer > 5. Turn the knob until the display says < Set Time/Date Set Alarm DST 6. Press the ‘Select’ button.
7. Turn the knob until the correct time zone is seen on the display. Push the ‘Select’ button to set your time zone. Then turn the Menu knob until the hour setting is correct, and then press the ‘Select’ button. Set Time 1:30 PM 8. Turn the knob until the minute setting is correct, then press the ‘Select’ button. Set Time 1:34 PM The display shows with the new time shown beneath for 3 seconds, then returns to the menu, press the ‘Back’ button 2 times to go to the main menu.
< Set Time Set Alarm > 5. Press the ‘Select’ button. Disable all 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6. Turn the knob to choose between which turns off all alarms or any of the 5 alarms. Press the select button to set the alarm that you want to activate. Below is an example to set Alarm 1. Choose < 1 Off 12:00 AM> < 1 Off 12:00 AM > 7. If you choose “Yes” then the display enables you to set the time for the alarm. Set Alarm 15:06 8.
Alarm Set: 07:45 10. Turn knob to choose how often you want the Alarm to alarm 11. Turn knob to use either the buzzer or the current radio station that is playing to turn on. The display shows with the time of the alarm shown beneath for 3 seconds and then returns to the radio station display. When in Standby Mode, the Alarm time is shown next to the clock time with brackets. 1:58 Ensure the volume is set to the desired level.
Configuring ‘My Stuff’ Registering your radio / creating an account 1. Your radio must be connected to your Wi-Fi internet connection prior to registering your radio and creating an account. Go to the main menu of your radio. ‘Internet radio’ will be on the top of the radio’s main menu. Scroll towards the bottom of this menu and choose ‘settings’. On the next menu scroll until ‘register’ is highlighted then push the large select knob inwards. Your radio will create a registration code (key).
Configuring “My Stations’ 1. It is possible to search for radio stations that are available in Grace Digital Audio’s stations’ database from Grace Digital Audio’s website. Whenever stations are searched for on the website, they will be displayed in a list of search results together with a link to ‘Add to My Stations’. 2. Clicking on the ‘Add to My Stations’ link, will add the station to your account’s ‘My Stations’ list.
3. Once you have podcasts available in your ‘My Podcasts’ list, you may access these feeds from your Internet Radio. These podcasts will be available on your radio from the menu item: ‘Stations > My Stuff > My Podcasts’. Please note, the podcasts will only be available to your radio once your radio has downloaded a new stations’ list. To cause the radio to download a new stations’ list, please remove and reconnect the power to your radio. Configuring “My Pandora’ 1.
< My Pandora > 6. Select ‘Stations’ < Stations Search > Accessing Pandora Feedback Menu 1. While listening to one of your Pandora radio stations choose the ‘Reply button on the internet radio or remote control. The ‘Reply’ button will allow you to perform the similar choices as you do with your regular Pandora on line account. Choosing the reply button will allow you to thumbs up / down a song, sleep up to 6 songs an hour, book mark songs and artist etc.
Settings Menu Choosing desired option from the Configure menu 1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the ‘Back’ button to go back to the previous screen.) 2. Turn the knob until ‘Settings’ is displayed 3. Press the ‘Select’ button. 4. Turn the knob until the display shows the option you want. 5. Press the ‘Select’ button to choose the option shown on the display. The options are explained below.
Please note that your radio’s serial number will still be registered with your Grace Digital internet radio account (assuming you already registered the radio). Any premium station passwords, my stuff stations and podcast that were saved on our web site will be saved all re-associate with your radio after you power back on, log onto your network and download a new stations list. This will display a key that can be used to register the radio on the Grace Digital Audio Customer portal: www.
This menu will show the signal strength of your Wi-Fi access point as it is seen by the internet radio. This feature can assist you in locating of your internet radio for optimal performance. Other Cool Stuff Please note this manual is for the current shipping version of software (FIRMWARE). We periodically release new software (FIRMWARE) with new features and move some menu items around that may reorganize your current menu layout.
Troubleshooting Please read the User’s Guide carefully to ensure proper use of your system and to enjoy your NOSTALGIC RADIO’s basic and advanced features. Please keep this User’s Guide for future reference. If you experience any trouble with your wireless internet radio NOSTALGIC RADIO, then you may find it useful to visit the help section on our webpage: http://www.gracesupport.
. Specifications 802.11n WiFi WEP & WPA 1 /2 compliant Class-D digital amplifier, 16 watts at 4 ohms (50 watt peak) 4-Line 128 x 64 dots display 100 - 240V, 12V 1.2A switching power adapter Stand alone 4” full range cone driver with rear bass reflex port Weight: 7lbs Dimensions: 7.75” x 5.5” x 12.25” * Specifications subject to change without notice . License Information and Warranty This product contains software licensed under version 2 of the GNU Public License and version 2.
Warranty (continued) Your NOSTALGIC RADIO (GDI-IRN1941) is supported by a limited manufacturer’s warranty for product defects in material or workmanship that may be evident under normal use for 1 year from date of purchase from an authorized franchisee or dealer. The warranty stated herein is the only warranty applicable to this product. All other warranties, expressed or implied are hereby disclaimed and are limited by the written limited warranties contained herein.
Using the USB Port as a USB-Ethernet Connection Your radio is equipped with 801.11n Wi-Fi card for a wireless connection to your wireless router that is connected to your internet service. Your radio may also connect using the USB port with the use of a USB-Ethernet adaptor (separate USB-Ethernet adaptor purchase required) . Once you have a USB-Ethernet adapter, remove the power from the radio then insert into the USB port, plug the radio back into the power.
