User Guide

10
TTR2 Sound Station User Guide
Step 1: Connect to a Wireless Network
The easiest way to connect to a wireless network is to have the Sound Station scan for wireless networks,
and then choose your wireless network from the list of wireless networks. The Sound Station will
automatically do this the first time you power it on.
However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled, you’ll have to
manually enter the network settings. Refer to “Manually Connecting to a Wireless Network” on page 11.
Turning the TUNE knob scrolls through menus and lists to highlight items, and pressing the TUNE knob
selects a highlighted item.
Easy Connection to a Wireless Network
1. Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on the rear
of the SiriusXM Sound Station. Press the Power button if the Sound Station does not automatically turn
on.
2. If the Sound System has not previously connected to a wireless network, the Sound Station will display
the Network Wizard screen, with Wireless highlighted. Press the TUNE Knob.
Otherwise, press the HOME button, turn the TUNE knob to
highlight Setup and press the TUNE knob to select. Turn the TUNE
knob to highlight Network Wizard and press TUNE knob to select.
Wireless will be highlighted; press TUNE knob to select.
3. At the Wireless screen, Scan will be highlighted. Press the TUNE
knob to select.
4. Wait while the Sound Station scans for wireless networks and then
select your wireless network from the list. Turn the TUNE knob to
highlight your wireless network and then press the TUNE knob to
select.
5. The Sound Station will attempt to connect to the wireless
network. If you chose a network that requires a password, you will
be prompted to enter the network password. Password will be
highlighted. Press the TUNE knob to begin entering the password.
Otherwise, the Sound Station will attempt to connect to the
wireless network.
6. To enter the network password, turn the TUNE knob to highlight
each character of the password and press the TUNE knob to
select the character. Then enter the next character and continue
until you have finished entering the password. If you make an
error, press the Delete button to erase the character. When you
have completed entering the network password, press the Enter
button.
7. When the Sound Station has successfully connected to the
wireless network, “Connected successfully” will be displayed.
If you have not yet entered your username and password, continue with “Step 2: Enter Your SiriusXM
Streaming Account Information” on page 13.
Wireless
Scan
Manual
Scan
Your Wireless Network
Some Other Wireless Network
Some Other Wireless Network
B
a
A
_
Your Wireless Network
Password
Cancel Move Left Move RightEnter Delete
Installation