Manualshelf

User Guide

ManualsBrandsGrace Digital ManualsCompact Radios & StereosSiriusXM Sound Station - Internet radio by Grace Digital - GDI-SXTTR2
31323334353637383940
32
TTR2 Sound Station User Guide
Note that you will have to enter your SiriusXM streaming username and password before you can listen to
SiriusXM.
Network Wizard
The Network Wizard allows you to connect to a wireless or wired network.
IMPORTANT! To connect to a network which restricts access by MAC address, the MAC address
of the Sound Station must be added to the allowed list of MAC addresses in the access point
before connecting to the network. You can find the MAC address of your Sound Station by pressing
HOME, then turning and pressing the TUNE knob to highlight and select System Network Info.
Turn the TUNE knob to scroll until the MAC address of the Sound Station is displayed.
Network Wizard has two main options:
Wireless: This option is for connecting to a wireless network. Wireless has the following two options:
Scan: This option scans for wireless networks and displays a list. You can select a wireless network from
the list and quickly connect to it. Refer to “Step 1: Connect to a Wireless Network” on page 10.
Manual: This option allows you to enter all the wireless network configuration settings. Refer to
“Manually Connecting to a Wireless Network” on page 11.
Wired: This option is for connecting to a wired network. Note that you will need an optional Ethernet USB
adapter (sold separately). Wired has the following two options:
DHCP: This option is for networks which automatically supply an IP address and network information
(most networks).
Static IP: This option is for networks which use a static IP address. You will need to provide an IP
address and other network information.
To connect to a wired network using DHCP:
1. Connect the Sound Station to a wired network connection using the optional optional Ethernet USB
adapter (sold separately).
2. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
3. Turn the TUNE knob and highlight Network Wizard and press the TUNE knob to select.
4. Turn the TUNE knob and highlight Wired and press the TUNE knob to select.
5. Turn the TUNE knob and highlight DHCP and press the TUNE knob to select.
6. The Sound Station will attempt to connect to the network, and will display “Connected Successfully”
if the connection to the network was successful. If the Sound Station cannot connect to the network,
there is likely a connection problem with the network, or in the connection of the Sound Station to the
wired network.
Configuring the Sound Station