Manualshelf

User Guide

ManualsBrandsGrace Digital ManualsCompact Radios & StereosSiriusXM Sound Station - Internet radio by Grace Digital - GDI-SXTTR2
31323334353637383940
33
TTR2 Sound Station User Guide
To connect to a wired network using a Static IP:
Before entering the static IP network information you will need to know the following information about your
network:
IP Address for the Sound Station
Network Mask IP Address
Gateway IP Address
Primary DNS IP Address
1. Connect the Sound Station to a wired network connection using the optional optional Ethernet USB
adapter (sold separately).
2. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
3. Turn the TUNE knob and highlight Network Wizard and press the TUNE knob to select.
4. Turn the TUNE knob and highlight Wired and press the TUNE knob to select.
5. Turn the TUNE knob and highlight Static IP and press the TUNE knob to select.
6. IP will be highlighted. Press the TUNE knob to select. Enter the IP Address. The IP address must be
entered in the xxx.xxx.xxx.xxx format. When you have completed entering the IP address, press the
Enter button.
7. Enter the Network Mask in the same way as you entered the IP Address.
8. Enter the Gateway IP Address in the same way.
9. Enter the DNS IP Address in the same way.
10. When all the information has been entered, turn the TUNE knob to highlight Connect and press the
TUNE knob.
11. The Sound Station will attempt to connect to the network, and will display “Connected Successfully”
if the connection to the network was successful. If the Sound Station cannot connect to the network,
there is likely an error in the information that was entered, or in the connection of the Sound Station to
the wired network.
Network Info
Network Info displays the details of the current network configuration of the Sound Station. The MAC
address of the Sound Station can be found in the network info.
1. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
2. Turn the TUNE knob and highlight Network Info and press the TUNE knob to select.
3. The current network configuration will be displayed. Turn the TUNE knob to scroll through the
configuration details.
Configuring the Sound Station