User Guide

35
TTR2 Sound Station User Guide
Display Brightness
There are three different brightness backlight settings, and each type of backlighting can be set to a
brightness from 0 to 19.
Active: This setting controls the brightness of the display screen when the Sound Station is On, and you
are interacting with the Sound Station by pressing buttons, etc. After 30 seconds of inactivity, the display
changes to the inactive setting.
Inactive: This setting controls the brightness of the display screen when the Sound Station is On, but
you have not interacted with the Sound Station by pressing buttons, etc., for 30 seconds. You might use
this setting to set the brightness when in a darkened room as you are falling asleep while listening to the
Sound Station.
Standby: This setting controls the brightness of the display screen when the Sound Station is in standby
mode.
To set the Display Brightness:
1. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
2. Turn the TUNE knob to highlight Display Brightness and press the TUNE knob to select.
3. Turn the TUNE knob and highlight Active, Inactive, or Standby and press the TUNE knob to select.
4. Turn the TUNE knob to the desired setting, 0 to 19 and press the TUNE knob to select your setting.
Clock and Alarms
Clock set-up option has several selections:
24-hour time: This option sets the time format to a 12 or 24 hour format.
Alarm: The Sound Station has five alarm clocks, each of which can be configured differently. Refer to
Alarm Clock” on page 28 for information about the alarm clock.
Timezone: This option sets the Sound Station to the timezone for your area.
To enable or disable 24-hour time:
1. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
2. Turn the TUNE knob to highlight Clock and Alarms and press the TUNE knob to select.
3. Turn the TUNE knob and highlight 24-hour time.
4. Press the TUNE knob to enable 24-hour time (when the box has a checkmark in it), or disable (when
the box does not have a checkmark in it).
To select the Timezone:
1. Press the HOME button and turn the TUNE knob to highlight Setup. Press the TUNE knob to select.
2. Turn the TUNE knob to highlight Clock and Alarms and press the TUNE knob to select.
3. Turn the TUNE knob to highlight a timezone and press the TUNE knob to select. A checkmark in the
box next to the timezone indicates the selected timezone.
Configuring the Sound Station