User Guide

23
Audio Playback & Special Windows Set Up (Windows 7)
In some instances audio may NOT be heard from your computer’s speakers during the
recording process or during playback.
1. NO AUDIO during PLAYBACK
When the Cassette Tape Player is connected to your PC over the USB, the default playback d
evice changes to the USB Audio CODEC while connected.
¾ Solution (1) Preferred: Disconnect the USB cable from the PC.
¾ Solution (2) Alternative: Adjust the Audio Settings in the Control Panel
On Vista and Windows 7:
¾ Click “Start” on your computer & go to the Control Panel. Click on the “Sound” icon.
Click the “Playback” tab and change the playback device. Click OK. .
On Other Windows Versions (e.g.: Windows XP):
¾ Click “Start” and select “Programs”, “Accessories”, “Entertainment: and click “Sound
Recorder”. Within Sound Recorder click the “Edit” tab and select “Audio Properties”.
OR,
¾ Click on Control Panel and select “Sound and audio device”. Select the “Audio” tab.
In Sound playback, Change the default device in the drop down menu. Select a
playback device and click OK.
IMPORTANT: IF “Solution (2) Alternative” is selected, settings must be manually reset
every time the USB cable id connected from your Tape Player to your PC.