User Guide

11
Mondo+ User Guide
Installation
B
a
A
_
Manual
SSID
Cancel Move Left Move RightEnter Delete
Manually Connecting to a Wireless Network (Optional)
To manually connect to a wireless network, you’ll need to know the SSID (wireless network
name), password, and type of encryption, and also may need additional information about
your wireless network if it is not DHCP enabled:
SSID (wireless network name)
Password
Encryption (None, WEP, WPA-PSK)
IP (Address for the Mondo+)
Mask (Network Mask IP Address)
Gateway (Gateway IP Address)
DNS (Primary Name Server IP Address)
Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on
the rear of the Mondo+. Press the Power Button if the Mondo+ does not automatically turn on.
8. If the Sound System has not previously connected to a wireless network, the Mondo+ will
display the Network Wizard screen, with Wireless highlighted. Press the Tune Knob.
Otherwise, press the Home Button, turn the Tune Knob to highlight "Radio Settings" and
press the Tune Knob to select. Turn the Tune Knob to highlight Network Wizard and
press Tune Knob to select. Wireless will be highlighted; press Tune Knob to select.
9. At the Wireless screen, Scan will be highlighted. Turn the Tune Knob to highlight Manual
and then press the Tune Knob.
10. SSID (wireless network name) will be highlighted.
Press the Tune Knob. Enter the SSID by turning the
Tune Knob to highlight each character of the SSID
and press the Tune Knob to select the character. If
you make an error, press the BACK Button to erase
the character. When you have completed entering the
SSID, press the Enter Button.
11. Turn the Tune Knob and highlight Password. To enter
the password, turn the Tune Knob to highlight each
character of the password and press the Tune Knob
to select the character. If you make an error, press the
BACK Button to erase the character. When you have
completed entering the password, press the Enter
Button.
12. Turn the Tune Knob and highlight Encryption. Turn the Tune Knob to highlight the type
of encryption and press the Tune Knob to select.
13.
If DHCP is enabled on your wireless network, turn the Tune Knob and highlight DHCP
Connect and press the
Tune Knob . Skip ahead to step 12.
If DHCP is not enabled on the wireless network, turn the Tune Knob and highlight Static
IP and press the Tune Knob.
14. IP will be highlighted. Press the Tune Knob to select. Enter the IP Address. The IP
address must be entered in the xxx.xxx.xxx.xxx format. When you have completed
entering the IP address, press the Enter Button.