Manualshelf

User Guide

ManualsBrandsGrace Digital ManualsCompact Radios & StereosGrace Digital Mondo+ GDI-WHA6007 Wireless Smart Speaker and Internet Radio with Wi-Fi, Bluetooth and 3.5-inch Color Display (Red)
21222324252627282930
27
Mondo+ User Guide
Advanced Features
Factory Reset
The Factory Reset option restores the Mondo+ to the factory settings. It will erase all the
stored network settings, SiriusXM streaming username and password, presets, alarm clock
settings, and set all other options back to the factory settings.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Factory reset and press the Tune Knob to select.
3. Confirm that you really want to proceed with the factory reset. Confirm factory reset
will be highlighted. Press the Tune Knob to proceed with the factory reset, or press the
BACK Button to abort the factory reset.
4. The screen will display “Restoring factory defaults”, restart the Mondo+ when
complete and display “Please press the POWER button”.
NOTE: You will have to connect the Mondo+ to a network (see “Connect to a Wireless Network”).
Display Brightness
There are three different brightness backlight settings, and each type of backlighting can be
set to a brightness from 0 to 19.
Active: This setting controls the brightness of the display screen when the Mondo+
is On, and you are interacting with the Mondo+ by pressing buttons, etc. After 30
seconds of inactivity, the display changes to the inactive setting.
Inactive: This setting controls the brightness of the display screen when the Mondo+
is On, but you have not interacted with the Mondo+ by pressing buttons, etc., for 30
seconds. You might use this setting to set the brightness when in a darkened room as
you are falling asleep while listening to the Mondo+.
Standby: This setting controls the brightness of the display screen when the
Mondo+ is in Standby Mode.
To set the Display Brightness:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Display Brightness and press the Tune Knob to select.
3. Turn the Tune Knob and highlight Active, Inactive, or Standby and press the Tune Knob
to select.
4. Turn the Tune Knob to the desired setting, 0 to 19 and press the Tune Knob to select
your setting.
Optionally - When the radio is in Standby Mode, you can rotate the Tune Knob to temporarily
change the standby backlight brightness. This is perfect to make the display 100% dark while
sleeping, or brighter to see the clock.