User Manual

10
Encore+ User Guide
Installation
The easiest way to connect to a wireless network is to have the Encore+ scan for wireless
networks, and then choose your wireless network from the list of wireless networks. The
Encore+ will automatically display the strongest Wi-Fi network at the top of the list.
However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled,
you’ll have to manually enter the network settings. Refer to “Manually Connecting to a
Wireless Network” on page 11.
Turning the Tune Knob scrolls through menus and lists to highlight items, and pressing the
Tune Knob selects a highlighted item.
Easy Connection to a Wireless Network
1. Plug the AC Power Adapter into an AC outlet, and plug the power plug into the
connector on the rear of the Encore+. Press the Power Button if the Encore+ does not
automatically turn on.
2. If the Encore+ has not previously connected to a wireless network, the Encore+ will
display the Network Wizard screen, with Wireless highlighted. Press the Tune Knob.
Otherwise, press the Home Button, turn the Tune Knob to highlight Setup and press the
Tune Knob to select. Turn the Tune Knob to highlight Network Wizard and press Tune
Knob to select. Wireless will be highlighted; press Tune Knob to select.
3. At the Wireless screen, Scan will be highlighted. Press
the Tune Knob to select.
4. Wait while the Encore+ scans for wireless networks
and then select your wireless network from the list.
Turn the Tune Knob to highlight your wireless network
and then press the Tune Knob to select.
5. The Encore+ will attempt to connect to the wireless
network. If you chose a network that requires a
password, you will be prompted to enter the network
password. Password will be highlighted. Press
the Tune Knob to begin entering the password.
Otherwise, the Encore+ will attempt to connect to the
wireless network.
6. To enter the network password, turn the Tune Knob
to highlight each character of the password and press
the Tune Knob to select the character. Then enter the
next character and continue until you have finished
entering the password. If you make an error, press the
Delete Button to erase the character. When you have
completed entering the network password, press the
Enter Button.
7. When the Encore+ has successfully connected to
the wireless network, “Connected successfully”
will be displayed.
Wireless
Scan
Manual
Scan
Your Wireless Network
Some Other Wireless Network
Some Other Wireless Network
B
a
A
_
Your Wireless Network
Password
Cancel Move Left Move RightEnter Delete
Connect to a Wireless Network