User Manual
26
Encore+ User Guide
Advanced Features
Network Info
Network Info displays the details of the current network conguration of the Encore+. The
MAC address of the Encore+ can be found in the network info.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob and highlight Network Info and press the Tune Knob to select.
3. The current network configuration will be displayed. Turn the Tune Knob to scroll
through the configuration details.
Firmware Update
Grace Digital may occasionally update the software for the Encore+ and it is recommended
that you always update the software when new software becomes available. The Encore+
will automatically check for software updates when you turn it on, but you also can manually
check for any available software updates.
1. Press the Home Button and turn the Tune Knob to highlight Setup. Press the Tune Knob
to select.
2. Turn the Tune Knob to highlight Firmware Update and press the Tune Knob to select.
3. If the Encore+ has already detected that a software update is available, it will show a
software update available.
If not, the Encore+ will check for a software update. If no update is available, the
Encore+ will display “No new updates”.
4. If a software update is available, turn the Tune Knob to highlight Install update and press
the Tune Knob to select.
5. The software update will be applied to the Encore+. Do not turn the Encore+ off during
the update, or disconnect the Encore+ power. When complete, the Encore+ will restart
to complete the update, and display “Please press the POWER button”.
Radio Info/Change Radio Name
The Info option displays information about the Encore+ serial number and software version.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Info and press the Tune Knob to select. The
information will be displayed.
You can change the name of your radio by selecting Radio Info then highlight and select
Device Name. The new name will now show up in Chromecast enabled apps, used for the
Google assistant, and broadcast via Bluetooth.