User's Guide
32
Mondo Alto User Guide
Advanced Features
In Deep Sleep mode all functions are disabled including the alarm, remote, Wi-Fi, Ethernet,
and Bluetooth connections. This reduces power consumption and is especially helpful when
utilizing the Optional battery (sold separately). Since all operations are turned off you will not
be able to see the radio on your network or turn it back on with the infrared remote control.
For typical daily use Deep Sleep mode is not suggested or needed.
Presets, settings, and passwords are saved even in deep sleep mode, and during power outages.
Master Power O
In order to completely turn your radio off, without having to remove your battery or unplug
the power cable please select Master Power O. This will completely turn the radio off. All
your settings, password, presets will remain saved in this mode. To delete all settings refer to
Factory Reset on page 33.
Network Info
Network Info displays the details of the current network conguration of the Mondo Alto. The
MAC address of the Mondo Alto can be found in the network info.
1. Press the Home Button and turn the Tune Knob to highlight Settings. Press the Tune
Knob to select.
2. Turn the Tune Knob and highlight Network Info and press the Tune Knob to select.
3. The current network configuration will be displayed. Turn the Tune Knob to scroll through
the configuration details.
Firmware Update
Grace Digital may occasionally update the software for the Mondo Alto and it is
recommended that you always update the software when new software becomes available.
The Mondo Alto will automatically check for software updates when you turn it on, but you
also can manually check for any available software updates.
1. Press the Home Button and turn the Tune Knob to highlight Setup. Press the Tune Knob
to select.
2. Turn the Tune Knob to highlight Firmware Update and press the Tune Knob to select.
3. If the Mondo Alto has already detected that a software update is available, it will show
a software update available.
If not, the Mondo Alto will check for a software update. If no update is available, the
Mondo Alto will display “No new updates”.
4. If a software update is available, turn the Tune Knob to highlight Install update and press
the Tune Knob to select.
5. The software update will be applied to the Mondo Alto. Do not turn the Mondo Alto off
during the update, or disconnect the Mondo Alto power. When complete, the Mondo
Alto will restart to complete the update, and display “Please press the POWER button”.