User's Guide

Mondo Alto User Guide

Radio Info / Change Radio Name

The Info option displays information about the Mondo Alto serial number and software version.

1. Press the Home Button and turn the Tune Knob to highlight Settings. Press the Tune

Knob to select.

2. Turn the Tune Knob to highlight Info and press the Tune Knob to select. The

information will be displayed.

You can change the name of your radio by selecting Radio Info then highlight and select

Device Name. The new name will now show up in Chromecast-enabled apps, used for

Google Assistant, and broadcast via Bluetooth.

Factory Reset

The Factory Reset option restores the Mondo Alto to the factory settings. It will erase all the

stored network settings, SiriusXM streaming username and password, presets, alarm clock

settings, and set all other options back to the factory settings.

1. Press the Home Button and turn the Tune Knob to highlight Settings. Press the Tune

Knob to select.

2. Turn the Tune Knob to highlight Factory reset and press the Tune Knob to select.

3. Confirm that you really want to proceed with the factory reset. Confirm factory reset

will be highlighted. Press the Tune Knob to proceed with the factory reset, or press the

Back Button to abort the factory reset.

4. The screen will display “Restoring factory defaults”, restart the Mondo Alto when

complete and display “Please press the POWER button”.

NOTE: You will have to connect the Mondo Alto to a network (see “Connect to a Wireless Network”).

Display Settings

There are three different brightness backlight settings, and each type of backlighting can be

set to a brightness from 0 to 20. In addition, each of the backlight settings can be set for two

times of the day. This allows you to have two separate groups of settings, one for the daytime

and one for the nighttime. Select the rst option and set the time of day for that option, then

you will be able to set the active, inactive, and standby settings for that time frame. Repeat

the settings for your nighttime mode.

Active: This setting controls the brightness of the display screen when the Mondo

Alto is On, and you are interacting with the Mondo Alto by pressing buttons, etc. After

30 seconds of inactivity, the display changes to the inactive setting.

Inactive: This setting controls the brightness of the display screen when the Mondo

Alto is On, but you have not interacted with the Mondo Alto by pressing buttons, etc.,

for 30 seconds. You might use this setting to set the brightness when in a darkened

room as you are falling asleep while listening to the Mondo Alto.

Standby: This setting controls the brightness of the display screen when the Mondo

Alto is in Standby Mode.

Advanced Features