Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being en rend {include 3 easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY, PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in Position each past correctly and insert Use cardboard or carpet area when an assembly, please make sure the screws or bolts into their respective assembling furniture to prevent lock or spring washer is placed holes by hand tighten or using the scratches .
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#A x apes 1. Carefully place the backrest wiles (#1) onto a protected surface. #B x PCs 2. Align the per-drilled holes on the back side of the seat (#2) to the #C x PCs per-drilled holes along the front of the backrest wigs (#1) Prepare 2 bolt assemblies first inserting a lock B £3 washer (#B} onto the bolt #C) then a fiat washer {#A) onto that same bolt in that order.
#A x docs #B x PCs #D x PCs 1. Align the front legs (#3) fo the per-drilled holes located on the front comers of the seat 2. Prepare 4 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#D) then a flat washer (#A) onto that same bolt in that order. Insert into the front comer holes and secure using the Alpert wrench Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does not feel loose or wobbly.
