Assembly And Installation Instructions

Glass Bracket
Glass Shade(H)
Socket Ring
Chain
Loop Lock
Loop Lock
Fixture body
Canopy
Bulb Type A Max.60W
(not included)
1.
2. Attach the mounting strap to the outlet
box by using two mounting screws.
3. Choose the length of the chains you
need and adapt both chains to this
length. Connect one end of the
chains to the fixture loops by using
the loop locks. Then weave the fixture wire and the fixture
grounding wire through one of the chains. Then connect
the other end of the chains with the canopy loops by using
the loop locks.
4. Thread the fixture wires and fixture grounding wire through canopy loops and canopy.
5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
using the wire nuts:
---The smooth wires (marked) from the fixture to the black wire from the power source.
---The ridged wires (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with
a wire nut.
Carefully put the wires back into the outlet box.
6. Attach the fixture to the mounting strap, and secure it with two ball nuts.
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Bolt Nut(G)
Loop Lock (H)
Chain (I)
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Installation Steps
Long Screw (F)
Outlet Box
House Grounding Wire
Wire Nut (E)
Long Screw (F)
Mounting Strap (A)
Hex Nut (D)
Green Grounding Screw (C)
Mounting Screw (B)
Bolt Nut(G)
Thread the long screws through mounting
strap, then secure them with two lock
nuts .Adjust the length of long screws if
necessary.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS