Installation & Assembly

1
For Models OL13201 and OL13202 Only: Temporarily install the mounting plate to the junction box.
For Models OL13201 and OL13202 Only: Mark the anchor hole locations on the mounting plate and remove the mounting
plate.
For Models OL13201 and OL13202 Only: Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
For Models OL13201 and OL13202 Only: Screw the anchor screws into the anchors.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
Install the candle followers on top of the candle tubes.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Insert the glass panels into the shade and secure them in place using the panel screws and brackets.
Install the shade to the fixture and secure it in place using the shade screws.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Outdoor
1A
JUNCTION BOX
MOUNTING
PLATE
7
8
FIXTURE
SCREW
6
7
8
14
FIXTURE
BASE
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
9
10
ANCHOR
ANCHOR
SCREW
11
12
13
3
Installation Instructions for
4-Light Outdoor Wall Lantern
14
5
LAMP
CANDLE
FOLLOWER
CANDLE
TUBE
FIXTURE
GLASS PANEL
SHADE
SHADE SCREW
12
13
PANEL SCREW
AND BRACKET
10
11

Summary of content (4 pages)