Installation & Assembly

1
1
2
1A
3
4
5
Installation Instructions for
3-Light Lantern Head
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Insert the glass panels into the fixture and secure them in place using the panel screws and brackets.
Install the candle followers on top of the candle tubes.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the cover onto the fixture and secure it using the cover screws.
6
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
7
8
COVER
COVER SCREW
2
POST
POST SCREW
3
FIXTURE
GLASS PANEL
4
4
LAMP
CANDLE FOLLOWER
PANEL SCREW
AND BRACKET
88
7
6
CANDLE TUBE
5