Assembly & Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Glass Shade
Inner Arm
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock(K)
Loop Lock(K)
Outlet Box
House Grounding Wire
Wire Connector (E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(F)
Canopy(G)
Hex Nut(D)
Washer(J)
Collar(I)
Chain(L)
Loop
Bulb type A Max.
60W(not included)
Top Loop(H)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Connector (E)
Canopy (G)
Top Loop (H)
Collar (I)
Threaded Pipe (F)
Washer (J)
Support Rod (M)
Loop Lock (K)
Chain (L)
Support Rod (M)
Holder
1. Tighten the metal frame onto the fixutre body, then install the
remainder.
2. Attach the threaded pipe to the mounting strap, and then
secure it with a washer and a hex nut.
3. Attach the mounting strap to the outlet box by using two
mounting screws.
4.Secure the top loop to the threaded pipe.
5. Secure the tube onto the stem of the fixture, thread fixture wires
through threaded tube and end of loop first.
6. Connect the chain:
- Determine length of chain needed to achieve desired fixture height.
(To remove excess chain section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire through the chain,
collar and canopy.
7. Connect one end of the chain to the loop using a loop lock.
8. Connect the other end of the chain to top loop by using the other loop lock .
9. Thread the fixture wire and fixture grounding wire through the top loop,
threaded pipe and mounting strap.

Summary of content (2 pages)