Installation & Assembly

HATHAWAY C
ASSE
OUNT
MB
ER
LY IN
HEIG
STRUCTIONS
HT TABLE ITEM# 21917DTW
STEP 2
a) With the assistance of another
person,
attach Side Stretcher
(P3)
to table legs by fitting
the lap
joint
on the each
part.
b) Insert Bolt
(H5)
through the hole from the side of
(P3)
through the table leg and fasten
with a nut. Use adjustable wrench to tighten bolt and nut.
c) Repeat the above assembly
procedures
for the other Side Stretcher.
STEP 3
a) With the assistance of another
person, place
the assembly from STEP 2 on its side as
b)
c)
shown.
Fit Bottom Panel
(P4)
between Table Legs to rest on Side Stretchers.
Use Screw
(H2)
fitted with Flat Washer
(H6)
to fasten
(P4)
to Side Stretchers
Do not tighten
(H1)
completely until all 4 screws are in
place
on
(P4).
Do not over
tighten.
usL uou$)ttolD wRL:Nc to
Page 3/3