Assembly & Installation Instructions

WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Photocell
Ball Nut (G)
Fixture
Back Plate
Turn off the power at fuse or circuit box.
Installation Steps
T
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Rubber Pad (H)
Bulb Type A
Max.60W
(not include)
Glass Panel
Hardware Package (included):
1. Thread two headless screws (D) through the cross bar (A), and then secure them with four lock nuts (F) (two on each
side of the cross bar (A).) Adjust the length of the headless screws (D) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture level.
Green Grounding Screw (E)
Headless screw (D)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (F)
Ball Nut (G)
Rubber Pad (H)
Cross Bar (A)
Wire Connector (F)
Outlet Box
Lock Nut (E)
Mounting Screw (B)
Green Grounding Screw (C)
Cross Bar (A)
Fixture
Wire
Fixture Grounding Wire
Headless Screw (D)
Metal Frame