Installation & Assembly

5LT PENDANT LIGHT
ASSEMBLY/INSTALLATION INSTRUCTIONS
installation.
shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
referencing the illustrations on the installation instructions.
Phillips screwdriver.
CAUTION
GENERAL
TOOLS REQUIRED
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS and
4. Make wire connections with WIRE CONNECTORS:
A - Connect the SMOOTH WIRE from Fixture to the black supply wire.
B - Connect the RIDGED WIRE from Fixture to the white supply wire.
connect it to the supply ground wire with a WIRE CONNECTOR. Carefully tuck wires back into the
JUNCTION BOX.
6. Attach the CEILING PLATE to the MOUNTING BRACKET through SCREW HOLES as shown,
and secure it with BALL NUTS.
7. Install BULBS(not included). See relamping label at socket area or packaging for maximum allowed wattage.
Please read carefully and save these instructions, as you may need them at a later date.
the FIXTURE SCREWS. Attach the MOUNTING BRACKET to the JUNCTION BOX using the
MOUNTING SCREWS. Secure MOUNTING BRACKET to JUNCTION BOX with WOOD SCREWS
and WALL ANCHORS.
5. Attach the LANYARDS on to the MOUNTING BRACKET.
2. Install SWIVELS and STEMS on of the FIXTURE. Install STEMS based on the desired length of the
item on the FIXTURE.
3. Install LANYARDS,BASEPLATE and FIXTURE on of the CEILING PLATE, and secure with WASHER
and DECORATIVE NUTS.