Installation & Assembly
Thank
you for purchasing
our
Island
Pendant
Chandelier Lighting for your house decoration.
We advise keeping the original packaging
one
month
just in case
of
any return requirement.
WARM
CAUTION
心
To
reduce
the
risk
of
fire, electric shock,
or
injury
to
persons:
1.
We suggest installation by a licensed electrician.
2.
Please
read
如
instruction
carefully
and
save it
as
you may need
it
at
later time.
3.
Before you start,
NEVER
attempt any work without shutting
off
由
e
electricity until the work
is
done. A).
Go
to the main fuse,
or
circuit breaker,
box
in your home.
Place
如
main
power
switch
in
the
"OFF"
position. B).
Place
出
e
wall switch in the
"OFF"
position.
4.
Mounting surface should
be
clean, dry, flat, strong enough
and 1 / 4" larger than the canopy
on
all side. Any gaps between
the
mounting
surface
and
canopy exceeding
3/16"
should
be
corrected
as
required.
5.
Make sure
that
the ceiling
or
wall can
stand
the weight
of
the lamp before fixture.
6.
Make sure the voltage you are using
is
120V.
The
maximum
wattage
is
60W
per
bulb(4 pcs E26 bulbs
not
included in
package).
7.
Keep
the lamp away
from
acidic
and
basic objects
in
case
of
damaging the surface
of
the lamp.
Image for finished product
8.
When
replacing
bulb,
you
should
turn
off
or
unplug
the
lamp
and
you
must
wait
until
it
is
cool
as
bulbs
get
hot
quickly
9.
The
safety
instructions
appearing
in
this
manual
are
not
meant
to
cover
all
possible
conditions
that
may occur.
It
must
be
understood
that
common
sense, caution
and
care
must
be
used with any electrical products.
1 O.Do
not
touch
the bulb
or
lamp shade during the lighting fixture working.
11.An individual
grounding
conductor
of
a chain-and-canopy
suspended
luminaire shall
be
interwoven
through
the chain from the luminaire to the canopy.
Assembly Instruction