User's Manual

Replace the battery door and

tighten the screw.

• The Nursery Unit uses 3-AA

(1.5V-LR6) batteries or standard

120 volt AC household current.

• To use AC adapters, plug the

connector on the cord into the DC

adapter jack on the back of the

Nursery Unit. Then plug adapter

into a standard wall outlet.

• Use ONLY the Graco adapters included with the unit.

Do not use these adapters with other equipment under

any circumstances.

• If units do not work, check that AC adapters are

plugged into working outlets.

• When electricity is off (from a power failure, etc.), the

Nursery Unit will operate on 3-AA (1.5V-LR6) batteries

in audio mode only.

Using AC Adapters