User's Manual

Within a few seconds, the

Parent Unit will lock on to the

Nursery Unit.

A second later, the connection

light will turn on. Your

monitor is now ready for use.

Setting Up the Baby Monitor

NOTE : It is very important that the steps below be

followed for first time power-up.

• Place the Nursery Unit within 3 meters (10 feet) of your

baby. Plug an AC adapter into the jack on the back of the

Nursery Unit. Plug it into a working 120 volt AC outlet.

• Point the Nursery Unit toward your baby.

Place the Parent Unit within five

1.5 meters (5 feet) of the

Nursery Unit and turn on the

Parent Unit using the On/Off

button on right side of the LCD

screen. Press and hold the

button for 3 seconds to turn on.

Depress the power button on the

Nursery Unit for 3 sec. to turn

camera on.