Airless Spray Guns Instructions Manual

ManualsBrandsGraco Inc ManualsPaint SprayerSG3-A

3Z9097

Rev. A

243012

TI0103

INSTRUCTIONS –

–

SG3-E, SG3-A Airless Spray Guns

3600 psi (248 bar, 24.8 MPa) Maximum Working Pressure

SG3-E

243238, A

Reversible Tip Guard, 515 Tip

SG3-A

243382, A

Reversible Tip Guard, 515 Tip

All models not available in all countries

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

Summary of content (8 pages)

PAGE 1
3Z9097 INSTRUCTIONS – Rev. A – SG3-E, SG3-A Airless Spray Guns 3600 psi (248 bar, 24.8 MPa) Maximum Working Pressure SG3-E 243238, A Reversible Tip Guard, 515 Tip SG3-A 243382, A Reversible Tip Guard, 515 Tip All models not available in all countries TI0103 243012 GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN Graco Inc. is registered to I.S.
PAGE 2
WARNING Fire and explosion hazard: Solvent and paint fumes can ignite or explode. To help prevent a fire and explosion: DUse in an extremely well ventilated area. DEliminate all ignition sources; such as pilot lights, cigarettes and static arcs from plastic drop cloths. Do not plug or unplug power cords or turn lights on or off in spray area. DGround Sprayer, object being sprayed, paint and solvent pails. DHold gun firmly to side of grounded pail when triggering into pail.
PAGE 3
/ CONTROLS / / Needle Adjustment Trigger Lock / / / / / Tip Guard / Trigger / / Tip / / / / / TI0103 / PRESSURE RELIEF / / 1 2 3 4 5 ALIGN SPRAY / / Follow 1–5 when you stop spraying.
PAGE 4
WARNING 1 2 3 / CLEAR CLOG / WARNING 1 4 CAUTION / / / 2 3 / / REPLACE NEEDLE / 1 / / ADJUST SPRAY / 2 4 3 OLD 5 6 7 8 SILICON CLEAN 4 3Z9097 NEW GREASE LOOSE
PAGE 5
9 Grease 10 11 26–32 ft–lb (19–24 N.
PAGE 6
Parts Drawing / / 243238, A 243382, A 10 26 1 2 1 8 7n 15a n2 6 35 n15 23 33 1 Included with 1 2 Included with 33 22 TI0104 24 5 Parts List / Ref. No. 1 2n 4 5 6n 7n 8 10 15n 15a 22 23 / Part No.
PAGE 7
Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
PAGE 8
ADDITIONAL WARRANTY COVERAGE Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”. TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor, or call 1–800–690–2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.