Installation Instructions
Common Procedures
333394P 23
4. Fill FlexLiner with water.
5. Securely tighten cup cover onto cup
support. Tighten so the arrow on the cup
cover is within range of the indicator on
the cup support.
6. Align VacuValve on cup cover with
Prime Pump/Spray knob. Push cup
assembly onto sprayer and twist to lock.
7. Plug sprayer into power source.
8. Make certain the Prime Pump/Spray
knob is in the Prime Pump position
(pointed down). On models with a dual
speed control switch, set speed control
to HIGH. On variable speed models set
speed control to 10.
9. Turn the sprayer upside down and point
the sprayer into a waste pail. Pull the
trigger for three seconds.
ti23383a
ti24279a
ti23258b