Operating Guide

Cleanup
333394R 17
13. Remove cup assembly and discard used
fluid. Dispose of used cleaning fluid
properly.
14. Replace cleaning fluid and repeat steps
1- 13 until spray output is clean.
IMPORTANT! For best results, do not spray
more than one cup of water through the tip
while cleaning. If more flushing is needed,
remove the tip from the sprayer to avoid
excessive wear.
15. Remove spray tip and strainer, see
Remove Spray Tip, page 20. Clean with
appropriate cleaning fluid (water or
mineral spirits). A soft brush can be used
to loosen and remove dried material if
needed.
16. Use a soft cloth to clean the cup support
and cup cover.
NOTICE
The spray tip guard is permanently
attached to the sprayer. Removal for
cleaning is not necessary and will result in
damage to the sprayer.
ti23389a
ti31003a
ti23404a
ti23372a