User Manual

How to Spray
333394H 13
Spray Pattern Quality
A good spray pattern is evenly distributed as
it hits the surface. If tails persist, material may
need to be thinned.
If material needs to be thinned follow
manufacturers recommendations.
If you see pulsations in the pattern, try the
following:
• On the dual speed models turn the dual
speed control to HIGH
• On the variable speed models turn the
variable speed control to higher setting
• Slow down your speed of movement
• Hold sprayer farther away from surface
• Switch to black (12") spray tip
ti23382a
GOOD PATTERN
BAD PATTERN
TAILS
TAILS
Spray Pattern is Pulsating