Instructions / Assembly

Storage
3A3208B 23
Storage
With proper storage, the sprayer will be ready
to use the next time it is needed.
Short Term Storage
(up to 2 days)
1. Perform Pressure Relief Procedure,
page 13.
2. Leave suction tube and drain tube in
paint pail.
3. Cover paint and pail tightly with plastic
wrap.
4. Engage trigger lock.
5. Leave gun attached to hose.
6. Remove tip and guard and clean with
water or flushing fluid and a brush.
7. Wipe paint off outside of gun using a
soft cloth moistened with water or flush-
ing fluid.
Long Term Storage
(more than 2 days)
Pump Armor fluid protects the sprayer
against freezing and corrosion.
• Before storing sprayer make sure all
water is drained out of sprayer.
• Do not allow water to freeze in sprayer.
• Do not store sprayer under pressure.
• Store sprayer indoors.
1. Perform Pressure Relief Procedure,
page 13.
2. Place suction tube in Pump Armor fluid
bottle and drain tube in waste pail.
ti27185a
ti27186a
ti25196b
ti27187a