Full Product Manual

Warnings
6 3A4433B
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Sprayer generates sparks. Do not spray or flush with flammable liquids.
• Do not spray or clean with materials having a flash point lower than 100° F (38° C).
• Use only non-flammable or water-based materials, or non-flammable paint thinners.
• Keep spray area well-ventilated. Keep a good supply of fresh air moving through the area.
• When spraying oil-based material, use outdoors or in a well-ventilated indoor area with a
flow of fresh air.
• Do not spray combustible materials near an open flame or sources of ignition such as
cigarettes, motors, and electrical equipment.
• Paint or solvent flowing through the equipment is able to result in static electricity. Static
electricity creates a risk of fire or explosion in the presence of paint or solvent fumes.
• Keep sprayer at least 10 in. (25 cm) away from objects while spraying or flushing.
• Verify all containers and collection systems are grounded to prevent static discharge.
• Connect to a grounded outlet and use grounded extension cords. Do not use a 3 to 2
adapter.
• Do not use paints or solvents containing halogenated hydrocarbons.
• Do not smoke in the spray area.
• Do not operate light switches, engines, or similar spark producing products in the spray
area.
• Keep area clean and free of paint or solvent containers, rags, and other flammable
materials.
• Know the contents of the paints and solvents being sprayed. Read all Safety Data Sheets
(SDS) and container labels provided with the paints and solvents. Follow the paint and
solvents manufacturer’s safety instructions.
• Fire extinguisher equipment shall be present and working.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can
cause electric shock.
• Turn off and disconnect power cord before servicing equipment.
• Connect only to grounded electrical outlets.
• Use only 3-wire extension cords.
• Ensure ground prongs are intact on power and extension cords.
• Do not expose to rain. Store indoors.