Full Product Manual

Cleanup
20 3A4803B
4. Set the sprayer upside down on a flat
surface. This will keep the wet paint in
the cup cover. Return excess material to
original container. Hold the FlexLiner in
place when pouring.
5. You can either dispose of the used
FlexLiner and install a new FlexLiner or
clean a used FlexLiner.
6. To clean the sprayer, fill FlexLiner
approximately half-full with appropriate
cleaning fluid (warm water or mineral
spirits) and close vacuvalve.
7. Securely tighten cup support with
FlexLiner to cup cover/sprayer.
8. To clean the cup cover and pump filter
shake the entire sprayer for ten seconds.
To avoid fire and explosion do not spray
solvents through the spray tip. Remove
spray tip, spray tip guard and clean in a
bucket of compatible solvent.
ti29759a
ti29756b
ti30558a