Product Label

15
16
TIP TECHNOLOGY
FINISHPRO AIRLESS
Only Graco gives you the ability to customize your air-assisted airless sprayer to fit your needs
— whether you need fast high-production spraying or a smooth HVLP-like finish.
ACCESSORIESACCESSORIES
IN MM .008 .010 .012 .014 .016 .018 .020
FAN WIDTH
2-4 (51-102) 108 110 112
4-6 (102-152) 208 210 212 214
6-8 (152-203) 308 310 312 314
8-10 (203-254) 410 412 414
10-12 (254-305) 510 512 514 516 518 520
12-14 (305-356) 612 614 616 618 620
Flow Rate (gpm)
.07 .11 .15 .21 .27 .35 .43
Flow Rate (lpm)
.26 .41 .59 .80 1.04 1.32 1.63
RAC X LOW PRESSURE SWITCHTIPS
(FFLPXXX)
IN MM .013 .015 .017 .019 .021 .023 .025 .027
FAN WIDTH
6-8 (152-203) 313 315
8-10 (203-254) 415 417 419 421 423 425
10-12 (254-305) 515 517 519 521 523 525 527
12-14 (305-356) 617 619 621 623 625 627
14-16 (356-406) 723 725
RAC X LOW PRESSURE
SWITCHTIPS (LPXXX)
VS
PRECISION-CUT FINE FINISH FLAT TIPS
RAC X FFLP SWITCHTIPS
Characteristics:
The exclusive internal tip geometry of Graco’s
RAC X Fine Finish Low Pressure Tips delivers the
industry’s best finish at the lowest airless spray
pressure. Sprays at up to 50% lower pressure.
•
Easiest pattern overlap
•
Less overspray
•
Up to 2X life
Recommended Uses:
•
When speed and finish quality are
equally important
Characteristics:
The Precision-Cut Flat Tip is designed with
stains and lacquers in mind and produces
the best atomization for extremely smooth
finishes for furniture and similar applications.
•
Delivers softest spray fan
•
Offers fan width control
•
Closer to HVLP quality
•
Zero air cap buildup
Recommended Uses:
•
Where finish quality is the #1 requirement
INDUSTRIAL QUALITY
•
An industrial-grade finishing gun, built
for years of uninterrupted service
LIGHTWEIGHT, ERGONOMIC DESIGN
•
Becomes an extension of your hand so
you deliver a perfect finish — every time
SOFTER SPRAY PATTERN
RAC X Air Cap
•
Accepts RAC X SwitchTips for quick and
easy tip clog clean-out
•
Softer, more consistent spray pattern —
eight air ports inject air closer to the tip
MINIMIZE TIP CLOGS
Gun Filter
•
Integrated into the gun
•
Fine mesh results in a superior finish
FAST AND EASY ADJUSTMENTS
Air Adjustment Valve
•
Air control at the gun allows “on the fly”
adjustments to maximize performance
ULTIMATE PERFORMANCE
Precision Cut Fine Finish Flat Tip Kit
•
Air cap utilizes flat tips
•
Extremely high performance in
low-viscosity, light-bodied materials
INLINE MOISTURE REMOVAL
Air Moisture Filter
•
Desiccant material removes all moisture
from air supplied by the compressor
•
Improved performance when spraying
solvent-based finishes
•
Disposable filter design
GRACO-ONLY TECHNOLOGY FOR THE ULTIMATE FINISH
G40
AIR-ASSISTED AIRLESS GUN
The premier Air-Assisted Airless gun in the industry provides an ultra-light trigger
pull and ergonomic fit. The G40 comes standard with all FinishPro II sprayers.
GUN FILTER
is integrated into the gun
to minimize tip clogs
AIR-ASSISTED AIRLESS GUNAIR-ASSISTED AIRLESS GUN
Water @ 1000 psi (70 bar, 7.0 Mpa) - paints with a higher viscosity will decrease
the flow rate. Order desired tip (part no. AAMxxx) from chart above. Example: for a
tip with a 0.009 orifice and a 6 in (250 mm) pattern, order AAM309
IN MM .007 .009 .011 .013 .015 .017
FAN WIDTH
2-4 (51-102) 109 111
4-6 (102-152) 207 209 211 213 215 217
6-8 (152-203) 307 309 311 313 315 317
8-10 (203-254) 409 411 413 415 417
10-12 (254-305) 509 511 513 515 517
12-14 (305-356) 611 613 615 617
Flow Rate (gpm)
.05 .09 .12 .18 .24 .31
Flow Rate (lpm)
.20 .33 .49 .69 .91 1.17
PRECISION-CUT FLAT TIPS
AAM FLAT TIP (AAMXXX)
G40 Gun
262929