Full Product Manual

Setup
3A5725C 15
NOTE: Each clamp should be adjusted
equally so the lid sits even on the hopper.
Mixing Material
• Mix the material in a separate container
before pouring it into hopper.
• If thicker materials are desired, test
material flow in hopper first. Then spray
a test pattern.
• For best results, do not use partial bags
of material.
1. Mix the material and water in a
separate container.
Dry Mix
Carefully mix texture material and water
according to manufacturer instructions
on bag.
Premix
Slowly add approximately 2 to 6 quarts
(1.9 to 5.7 liters) of water to a 5 gallon
(18.9 liter) bucket of premix.
2. Agitate to mix, using a half-inch, variable
speed drill with mixing paddle, to a
smooth, lump-free consistency.
3. Allow ceiling texture to set for at least 15
minutes. Then remix prior to use.
NOTICE
Over-tightening the lid may damage the
hopper and/or hopper lid.