Full Product Manual

Storage
28 3A6430C EN
4. Place drain tube in waste pail. Turn
pressure control to the START position.
5. While holding the Suction Tube above
the sprayer, pour approximately 2
ounces (1/4 cup) of Pump Armor into
Suction Tube and turn Power Switch
ON.
6. When Pump Armor is flushed through
the sprayer and out the Drain Tube,
turn Power Switch OFF. Replace and
tighten child-proof cap for storage.
7. Screw Inlet Screen back to Suction
Tube. Ensure that spray gun and hose
stay attached to sprayer.
8. Lower Spray/Prime Valve to SPRAY
position for storage.
9. Turn ON/OFF switch to OFF position.
Disconnect power (unplug power cord).
10. Secure a plastic bag around suction
and Drain Tube to catch any drips.
ti27190a