Replacement Parts • Warranty Information (USA) Product Registration (USA) To purchase parts or accessories or for warranty information in the United States, please contact us at the following: To register your Graco product from within the U.S.A. visit us online at www.gracobaby.com/productregistration We currently do not accept product registrations from those living outside the United States of America. www.gracobaby.
Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities. When using the monitor, you must still provide the supervision necessary for the continued safety of your child. This product is not designed or intended for use as a medical monitor.
Battery Installation Parent Unit Plug in cord • The battery must be plugged into the Parent Unit before the unit will be ready for use. Remove the battery door cover on the Parent Unit with a key or flat blade screwdriver. Remove the battery pack from the packaging and plug into the back of the unit. Place the battery pack into the recess and press the wire into the slot on the side. Replace the battery door. Nursery Unit • Turn the unit over, and use Phillips screwdriver to remove the battery door.
Low Battery Indication Parent Unit • When the battery is low in the Parent Unit, the low battery symbol will show in the center of the LCD screen. If operated too long on a low battery, you may also experience a poor signal and the no connection symbol on the LCD screen will appear and you will begin to hear a continuous audible beep from the Parent Unit. • You may either turn off the unit or plug in the A/C adapter to recharge the batteries.
Testing the System It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units if you suspect they may have been damaged or have not been used for a long time. 1. If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the other speaks into the Nursery Unit. 2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it. 3.
Talk Feature • Press and hold Talk Button on Parent Unit to speak to your child through the child unit. You will hear a single beep when the connection to the Nursery Unit is made and you can speak. NOTE: The Talk icon is showing on the LCD screen when Talk feature is active. NOTE: When activating the Talk feature from the Parent Unit, transmission from the child unit to the parent unit is temporarily disabled. TroubleShooting DO NOT ATTEMPT to modify the unit.
Piezas de repuesto • Información sobre la garantía (EE.UU.) Registro del producto (EE.UU.) Para comprar piezas o accesorios o para obtener información sobre la garantía en los Estados Unidos, por favor comuníquese con nosotros en: Para registrar su producto Graco desde dentro de los EE.UU., visítenos en línea en www.gracobaby.com/productregistration. Actualmente no aceptamos registros de los productos de quienes viven fuera de los Estados Unidos de América. www.gracobaby.
No observar estas advertencias y las instrucciones de armado podría resultar en lesiones serias o la muerte. Este dispositivo ha sido diseñado solamente para monitorizar los sonidos de su niño. No le enviará alertas sobre lasactividades silenciosas de su niño. Cuando se usa el monitor, debe proporcionar la supervisión necesaria para mantener la continua seguridad de su niño. Este producto no ha sido diseñado ni debe usarse como un monitor médico.
Instalación de las pilas Unidad para padres Instale la pila • La pila debe estar instada en la unidad para padres antes de que la unidad esté lista para su uso. Saque la puerta de las pilas de la unidad para padres con una llave o destornillador plano. Saque el paquete de pilas del empaquetado y enchúfelo a la parte trasera de la unidad. Ponga el paquete de pilas en el compartimiento y oprima el alambre en la ranura del costado. Vuelva a instalar la puerta de las pilas.
Unidad para padres Indicador de pilas descargadas • Cuando la pila está baja en la unidad para padres, aparecerá el símbolo de pila descargada en el centro de la pantalla de cristal líquido. Si funciona durante demasiado tiempo con la pila descargada, también podría experimentar una señal en la pantalla de cristal líquido y pobre y aparecerá el símbolo de falta de conexión usted comenzará a escuchar un sonido continuo de la unidad para padres.
Prueba del sistema Es MUY IMPORTANTE probar al sistema cuando lo instala por primera vez y periódicamente en adelante. Pruebe las unidades si sospecha que podrían haber resultado dañadas o no han sido usadas durante un tiempo largo. 1. Si hay dos adultos presentes, haga que uno lleve las Unidades para padres a lugares diferentes, probando varios niveles del volumen mientras el otro habla en la Unidad del dormitorio. 2.
Función de conversación • Oprima y mantenga oprimido el botón de conversación en la unidad para padres para hablarle a su niño a través de la unidad para niño. Escuchará un solo sonido cuando se establezca la conexión con la unidad del dormitorio y pueda hablar. NOTA: El ícono hablar aparece en la pantalla de cristal líquido cuando la función conversar está activada.