Process Equipment Catalog Pumping Solutions for Process Industries
Table of Contents Process Equipment Buyer’s Guide Contents Air-Operated Double Diaphragm Pumps Model Overview ........................... 2 Pump Selection Key for Husky AODD Pumps .............................................. 4 Husky™ 205 Plastic Pumps ........................................................................ 9 Husky 307 Plastic Pumps ........................................................................ 11 Husky 515 Plastic Pumps ...........................................................
Air-Operated Double Diaphragm Pumps Model Overview Model Husky™ 205 Plastic Husky 307 Plastic Husky 515 Plastic Husky 716 Metal Husky 1050 Plastic Husky 1050 Metal Husky 1050HP Connection Size 1/4 in (6.3 mm) 3/8 in (9.4 mm) 1/2 in (12.7 mm) 3/4 in (19.1 mm) 1 in (25.4 mm) 1 in (25.4 mm) 1 in (25.
Husky 1590 Plastic Husky 1590 Metal Husky 15120 Plastic Husky 2150 Plastic Husky 2150 Metal Husky 2200 Plastic Husky 3300 Plastic Husky 3300 Metal 1-1/2 in (38.1 mm) 1-1/2 in (38.1 mm) 1-1/2 in (38.1 mm) 2 in (50.8 mm) 2 in (50.8 mm) 2 in (50.8 mm) 3 in (76.2 mm) 3 in (76.
Pump Selection Key Husky AODD Pumps Diaphragm Pump Designation Key For Husky 205, 307, 515, 716, 1590 and 2150 Pumps Part numbers are located on ID tag on center section of all Husky diaphragm pumps. D X X X X X Diaphragm Pump Size Pump Wetted Parts Seats Balls/ Checks Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS/CHECKS DIAPHRAGM 1 = 1/4” (6.35 mm) Standard: Polypropylene center section 2 = 1/4” (6.
Pump Selection Key Husky Selector Tool For Husky 1050, 1590, 15120, 2150, 2200 and 3300 Pumps Find the Right Pump for your Application To order a Husky 1050, 1590, 15120, 2150, 2200 or 3300, use the online selector tool at www.graco.com/process or contact your distributor. From the homepage at www.graco.com/process click on “Online Husky Selector Tool” Example of Product Selector Tool on www.graco.com/process.
Pump Selection Key Fluid Section Materials Aluminum Medium corrosion and abrasion resistance. Not for use with halogenated hydrocarbons. Polypropylene Wide chemical compatibility. Conductive Polypropylene Wide chemical compatibility. General purpose. General purpose. Groundable. Stainless Steel High level of corrosion and abrasion resistance. (316 Grade) Acetal Wide range of solvent resistance. Ductile Iron High abrasion resistance.
Pump Selection Key Diaphragm Materials Diaphragm Material* Description PTFE/EPDM Two Piece Widest chemical compatibility, extreme corrosion resistance, very low frictional coefficient, non-adhesive, high heat resistance. PTFE/EPDM Overmolded Same as above. Overmolded design improves wear, durability and cleanability. Longer life than above. Thermoplastic Polyester Elastomer (TPE) Good low temp properties. Good abrasion resistance. Often substituted for Buna.
Pump Selection Key Ball Check Materials Ball Check Material Description Thermoplastic Polyester Elastomer (TPE) Good low temperature properties. Good abrasion resistance. Stainless Steel High level of corrosion and abrasion resistance. Passivated 316 grade. Santoprene Good abrasion and chemical resistance. OK for use with some solvents, (e.g. MEK, acetone) caustic solutions, dilute acids and alcohols. Often substituted for EPDM or EPR. Geolast Good abrasion resistance.
Husky 205 Plastic Pumps Air-Operated Double Diaphragm Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats X Diaphragms Balls/ Checks PUMP SIZE (air motor type and material) WETTED PARTS SEATS CHECK VALVES DIAPHRAGM 1 = 1/4” (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 0 = No Seats 2 = Acetal 1 = PTFE 2 = 1/4” (6.
Husky 205 Plastic Pumps Performance Charts Dimensions 120 (8, 0.8) 6 (0.17) 100 (7, 0.7) 5 (0.14) A 80 (5.5, 0.55) A 4 (0.11) B 60 (4.1, 0.41) 40 (2.8, 0.28) B C 3 (0.085) 2 (0.057) C 1 (0.028) 20 (1.4, 0.14) Air Inlet 1/4 in npt(f) AIR CONSUMPTION scfm (m3/min) FLUID OUTLET PRESSURE psi (bar, MPa) Husky 205 Performance 0 gpm (lpm) 0 1 (3.8) 0.5 (1.9) 1.5 (3.8) 2 (7.6) 2.5 (9.5) 3 (11.4) 3.5 (13.3) 6.
Husky 307 Plastic Pumps Air-Operated Double Diaphragm Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM 3 = 3/8” (9.
Husky 307 Plastic Pumps Technical Specifications Husky 307 Plastic Pumps Acetal Polypropylene Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift (D31255) Maximum size pumpable solids Maximum ambient operating temperature*** Maximum diaphragm operating temperature*** Typical sound level at 50 psi (3.5 bar, 0.35 MPa) air @ 50 cpm Maximum air consumption Air pressure operating range 100 psi (7 bar, 0.7 MPa) 7.0 gpm (26.
Husky 307 Plastic Pumps Dimensions 3.14 in (80 mm) 4.98 in (126.5 mm) 2.53 in (64.5 mm) 1/4 npt(f) Air Inlet Fluid Outlet: 3/8 npt(f) 6.18 in (157 mm) 6.05 in (153.55 mm) 8.13 in (206.5 mm) 7.24 in (184 mm) 0.66 in (17 mm) 3/8 npt(f) Air Exhaust (muffler included) 6.3 in (160 mm) 8.12 in (206.5 mm) 1.06 in (2.7 mm) Fluid Inlet: 3/8 npt(f) 3.5 in (89 mm) 5.3 in (134.
Husky 515 Plastic Pumps Air-Operated Double Diaphragm Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM 5 = 1 /2” center (12.7 mm) or 3/4” ends (19.
Husky 515 Plastic Pumps Technical Specifications Husky 515 Plastic Pumps Acetal Polypropylene PVDF Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift *** Maximum size pumpable solids Maximum ambient operating temperature† Maximum diaphragm operating temperature† Typical sound level at 70 psi (4.9 bar, 0.49 MPa) air @ 125 cpm Maximum air consumption Air pressure operating range 100 psi (7 bar, 0.7 MPa) 15 gpm (57 lpm) 400 cpm 0.
Husky 515 Plastic Pumps Dimensions 1/4 npt(f) Air Inlet 1/2 npt(f) or bspt(f) Fluid Outlet 5.01 in (127 mm) 4.7 in (119 mm) 3/4 npt(f) Outlet 10.63 in (270 mm) 9.94 in (252.5 mm) 7.75 in (196.9 mm) 8.56 in (217.4 mm) 3/4 npt(f) Inlet 6.12 in (155.
Husky 716 Metal Pumps Air-Operated Double Diaphragm Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM 5 = 3/4” (19.05 mm) Standard: polypropylene center section 3 = Aluminum (npt) 2 = Acetal 1 = PTFE 1 = PTFE 4 = 3/4” (19.
Husky 716 Metal Pumps Technical Specifications Husky 716 Metal Pumps Aluminum Stainless Steel Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift Maximum size pumpable solids Maximum ambient operating temperature*** Maximum diaphragm operating temperature*** Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 200 cpm Maximum air consumption Air pressure operating range 100 psi (7 bar, 0.7 MPa) 16 gpm (61 lpm) 400 cpm 0.
Husky 716 Metal Pumps Dimensions 3/4 npt(f) or bspt(f) Fluid Outlet 4.25 in (108 mm) 1/4 npt(f) Air Inlet 2.76 in (62.5 mm) 3/4 npt(f) Outlet 4.44 in (112.8 mm) 3/4 npt(f) or bsp(f) Fluid Outlets 10.43 in (264.9 mm) 9.18 in (233.2 mm) 7.37 in (187.2 mm) 7.8 in (198.1 mm) 6.62 in (168.1 mm) 4.29 in (109 mm) 3/4 npt(f) or bspt(f) Fluid Inlets 3/4 npt(f) Inlet 3/4 npt(f) or bsp(f) Fluid Inlets 6.04 in (153.
Husky 1050 Plastic Pumps Air-Operated Double Diaphragm Husky 1050 Selector Tool To order a Husky 1050, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Options for seats, check balls, diaphragms, and seals vary for the 1050A, 1050C, 1050F, 1050H, 1050P, and 1050S Example of Product Selector Tool on www.graco.com/process. pump models.
Husky 1050 Plastic Pumps Popular Models Material Polypropylene Part Number Standard Air Valve 649001 649006 649034 Materials for Seats Polypropylene Polypropylene Polypropylene Materials for Balls Santoprene PTFE PTFE Air Valve Materials for Diaphragms Replacement Kit Santoprene 24B773 PTFE/EPDM 2 Piece 24B773 PTFE/EPDM 2 Piece 24B773 Seat Kit 24B635 24B635 24B635 Ball Kit 24B646 24B645 24B645 Diaphragm Kit 24B628 24B627 24B627 Flange Center Center End Conductive Polypropylene 649218 Acetal PTF
Husky 1050 Plastic Pumps Polypropylene (1050P) and Conductive Polypropylene (1050C) Performance Charts Dimensions Husky 1050 Performance A 3/4 npt(f) air exhaust port A 100 (7, 0.7) B B 80 (5.5, 0.55) C 60 (4.1, 0.41) C 40 (2.8, 0.28) D 13.2 in. (335 mm) 20 (1.4, 0.14) 40 (1.12) 20 (0.56) 1/2 npt(f) air inlet 17.8 in. 10 (452 mm) (0.28) 15.7 in. (399 mm) 0 gpm (lpm) 0 5 (19) 10 (38) 15 (57) 20 (76) 25 (95) 30 (114) 2.5 in. FLUID FLOW gpm (lpm) (63.
Husky 1050 Metal Pumps Air-Operated Double Diaphragm Husky 1050 Selector Tool To order a Husky 1050, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Options for seats, check balls, diaphragms, and seals vary for the 1050A, 1050C, 1050F, 1050H, 1050P, and 1050S Example of Product Selector Tool on www.graco.com/process. pump models.
Husky 1050 Metal Pumps Popular Models Material Part Number Standard Air Valve Remote Air Valve Aluminum 647666 647502 647016 (UL Certified) Materials for Balls Acetal Acetal 647075 647561 Acetal PTFE 647040 647035 647526 647521 Geolast Santoprene Geolast Santoprene 647028 647514 316 SST PTFE 647004 647490 Polypropylene PTFE 647018 647504 316 SST 316 SST Stainless Steel 651009 651125 316 SST PTFE Hastelloy 651440 FKM PTFE Typical System Drawings Husky 1050 Floor-Mount 24
Husky 1050 Metal Pumps Technical Specifications Husky 1050 Metal Pumps Aluminum Stainless Steel Hastelloy Maximum fluid working pressure Maximum free flow delivery Maximum pump speed Displacement per cycle Maximum suction lift 125 psi (8.6 bar, 0.86 MPa) 50 gpm (189 lpm) 280 cpm 0.17 gal (0.64 liters) 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 1/8 in (3.2 mm) 125 psi (8.6 bar, 0.86 MPa) 50 gpm (189 lpm) 280 cpm 0.17 gal (0.64 liters) 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 1/8 in (3.2 mm) 125 psi (8.
Husky 1050 Metal Pumps Aluminum (1050A) Dimensions Aluminum 1 in. npt(f) or 1 in. bspt fluid outlet ports (4) 7.3 in. (185 mm) 14.7 in. (373 mm) 3/4 npt(f) air exhaust port 1/2 npt(f) air inlet 14.4 in. 12.7 in. (366 mm) (323 mm) 15.9 in. (404 mm) 10.9 in. (277 mm) 1.8 in. (46 mm) 1 in. npt(f) or 1 in. bspt fluid inlet ports (4) Mounting Pattern 5.5" 6.1 in. (155 mm) 5.0" 10.0 in. (254 mm) 5.0 in. (127 mm) Stainless Steel (1050S) 3.9 in. (99 mm) 5.5 in.
Husky 1050HP Metal Pumps HIgh Pressure Air-Operated Diaphragm Pump Configuration Options Pump Center Section and Air Valve Material Air Valve Manifolds 1050HP Aluminum Aluminum Standard A1 A2 S1 S2 Check Valve Seats SS A01A Check Valve Balls 316 Stainless Steel SP Santoprene Aluminum, Standard Ports, NPT Aluminum, Standard Ports, BSP Stainless Steel, Standard Ports, NPT Stainless Steel, Standard Ports, BSP Diaphragm Material Manifold O-Rings SP PT Santoprene PTFE Popular Models Part No.
Husky 1050HP Metal Pumps Technical Specifications Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 psi (14 bar, 1.4 MPa) Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-125 psi (1.4-6.9 bar, 0.14-0.69 MPa) Fluid displacement per cycle Low Pressure Setting . . . . . . . . . . . . . .
Husky 1050HP Metal Pumps Performance Charts Low Pressure Setting Husky 1050HP Performance Approx. Cycles per Minute FLUID OUTLET PRESSURE psi (bar, MPa) 125 (8.6, 0.86) 112 168 224 280 A 100 (7, 0.7) B 75 (5.2, 0.52) 80 (2.3) A B 60 (1.7) C 40 (1.1) C 50 (3.4, 0.34) D 25 (1.7, 0.17) D E 100 (2.8) AIR CONSUMPTION scfm (m3/min) 56 20 (0.
Husky 1050HP Metal Pumps Dimensions A C B Key Aluminum SST A 12.7 in (323 mm) 11.8 in (300 mm) B 14.4 in (366 mm) 12.9 in (328 mm) C 15.3 in (389 mm) 13.7 in (348 mm) D 10.9 in (277 mm) 9.5 in (241 mm) E 1.8 in (46 mm) 1.1 in (28 mm) F 10.8 in (274 mm) 10.7 in (272 mm) G 21.5 in (546 mm) 20.
Husky 1590 Plastic Pumps Air-Operated Double Diaphragm Husky 1590 Selector Tool To order a Husky 1590, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.com/process.
Husky 1590 Plastic Pumps Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS B = 1-1/2” (38.1 mm) Standard: aluminum center section 2 = Poly (flange) C = 1-1/2” (38.1 mm) Remote: aluminum center section 5 = PVDF (flange) T = 1-1/2” (38.1 mm) Standard: stainless steel center section U = 1-1/2” (38.
Husky 1590 Plastic Pumps Technical Specifications Husky 1590 Plastic Pumps Polypropylene PVDF Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift (DB2366) Maximum size pumpable solids Maximum operating temperature*** Maximum diaphragm operating temperature*** PTFE Santoprene Buna-N TPE Fluoroelastomer Geolast Typical sound level at 70 psi (4.9 bar, 0.
Husky 1590 Plastic Pumps Performance Charts Dimensions Husky 1590 Performance 100 (2.80) A 85 (2.38) A B 80 (5.5, 0.55) 70 (1.96) B 60 (4.1, 0.41) 40 (2.8, 0.28) 55 (1.54) C C 40 (1.12) D D 20 (1.4, 0.14) 25 (0.70) 0 gpm (lpm) 0 40 (152) 20 (76) 60 (227) 80 (303) 100 (379) 120 (454) 10 in (254 mm) 1/2 npt(f) Air Inlet AIR CONSUMPTION scfm (m3/min) FLUID OUTLET PRESSURE psi (bar, MPa) 120 (8.4, 0.84) 100 (7, 0.7) 7.55 in (191.77 mm) 16.25 in (412.5 mm) 11.99 in (304.
Husky 1590 Metal Pumps Air-Operated Double Diaphragm Husky 1590 Selector Tool To order a Husky 1590, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.com/process.
Husky 1590 Metal Pumps Air-Operated Double Diaphragm Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM B = 1-1/2” (38.1 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 1 = PTFE 1 = PTFE C = 1-1/2” (38.1 mm) Remote: aluminum center section 4 = Stainless Steel (npt) 4 = Hardened SST 2 = Acetal 5 = TPE T = 1-1/2” (38.
Husky 1590 Metal Pumps Technical Specifications Husky 1590 Metal Pumps Aluminum Stainless Steel Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift (DB2366) Maximum size pumpable solids Maximum operating temperature*** Maximum diaphragm operating temperature*** PTFE Santoprene Buna-N TPE Fluoroelastomer Geolast Typical sound level at 70 psi (4.9 bar, 0.
Husky 1590 Metal Pumps Performance Charts Dimensions Husky 1590 Performance 85 (2.38) A B 80 (5.5, 0.55) 70 (1.96) B 60 (4.1, 0.41) 40 (2.8, 0.28) 55 (1.54) C C 40 (1.12) D D 20 (1.4, 0.14) 25 (0.70) 0 gpm (lpm) 0 40 (152) 20 (76) 60 (227) 80 (303) 100 (379) FLUID FLOW (Pump tested in water with inlet submerged AIR PRESSURE A = at 120 psi (8.4 bar, 0.84 MPa) B = at 100 psi (7 bar, 0.7 MPa) C = at 70 psi (4.8 bar, 0.48 MPa) D = at 40 psi (2.8 bar, 0.
Husky 15120 Plastic Pumps Air-Operated Diaphragm Husky 15120Double Plastic Pumps Husky 15120 Selector Tool To order a Husky 15120, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.
Husky 15120 Plastic Pumps Popular Models Part Number Air Section Fluid Section Porting Seat Ball Diaphragm Air Valve Replacement Kit Ball Kit Diaphragm Kit 654504 Polypropylene Polypropylene Center Polypropylene PTFE 2-Piece PTFE 24B773 24W225 24W228 24W220 654505 Polypropylene Polypropylene Center Polypropylene PTFE PTFE OM 24B773 24W225 24W228 24W217 654511 Polypropylene Polypropylene End Polypropylene PTFE 2-Piece PTFE 24B773 24W225 24W228 24W220 654512 Polypro
Husky 15120 Plastic Pumps Dimensions 21.0 in (53.3 mm) 9.9 in (25.1 mm) 20.6 in 23.8 in (60.4 mm) (52.3 mm) 26.8 in (68.1 mm) 17.2 in (43.7 mm) 3.2 in (8.1 mm) 13.8 in (35.1 mm) 7.5 in (19.1 mm) 3.8 in (9.6 mm) 12.4 in (31.
Husky 15120 Plastic Pumps Performance Charts 1-Piece Bolt Through Design Husky 15120 Performance Approx. Cycles per Minute 63 94.5 126 157.5 189 90 (2.5) A 100 (7.0, 0.70) 75 (2.1) A B 80 (5.5, 0.55) 60 (1.7) B C 60 (4.1, 0.41) 40 (2.8, 0.28) 45 (1.3) C D 30 (0.8) D 20 (1.4, 0.14) AIR PRESSURE A = at 125 psi (8.3 bar, 0.83 MPa) B = at 100 psi (7 bar, 0.7 MPa) C = at 70 psi (4.8 bar, 0.48 MPa) D = at 40 psi (2.8 bar, 0.28 MPa) LEGEND Air Consumption Fluid Pressure 15 (0.
Husky 2150 Plastic Pumps Air-Operated Double Diaphragm Husky 2150 Selector Tool To order a Husky 2150, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. SERIAL NO. DATE CODE SERIES MAX WPR PSI-bar MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.com/process.
Husky 2150 Plastic Pumps Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM F = 2” (50.8 mm) Standard: aluminum center section 2 = Poly (npt) 3 = Stainless Steel 1 = PTFE 1 = PTFE G = 2” (50.
Husky 2150 Plastic Pumps Technical Specifications Husky 2150 Plastic Pumps Polypropylene PVDF Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift Maximum size pumpable solids Maximum operating temperature*** Maximum diaphragm operating temperature*** PTFE Santoprene Buna-N TPE Fluoroelastomer Geolast Typical sound level at 70 psi (4.9 bar, 0.
Husky 2150 Plastic Pumps Dimensions Performance Charts Husky 2150 Performance A 100 (7, 0.7) A 80 (5.5, 0.55) 100 (2.8) C C 60 (4.1, 0.41) 75 (2.1) 40 (2.8, 0.28) 50 (1.4) D 20 (1.4, 0.14) 11 in (280.5 mm) 125 (3.5) B B 8.69 in (220.5 mm) 150 (4.2) 25 (0.7) D AIR CONSUMPTION scfm (m3/min) FLUID OUTLET PRESSURE psi (bar, MPa) 120 (8.4, 0.84) 1/2 npt(f) Air Inlet 19.25 in (489 mm) 13.3 in (350.5 mm) 22.
Husky 2150 Metal Pumps Air-Operated Double Diaphragm Husky 2150 Selector Tool To order a Husky 2150, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.com/process.
Husky 2150 Metal Pumps Ordering Information D X X X X Diaphragm Pump Pump Size Wetted Parts Seats Balls/ Checks X Diaphragms PUMP SIZE (air motor type and material) WETTED PARTS SEATS BALLS DIAPHRAGM F = 2” (50.8 mm) Standard: aluminum center section G = 2” (50.8 mm) Remote: aluminum center section V = 2” (50.
Husky 2150 Metal Pumps Technical Specifications Husky 2150 Metal Pumps Aluminum Stainless Steel Ductile Iron Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Displacement per cycle** Maximum suction lift (DF3666) Maximum size pumpable solids Maximum operating temperature*** Maximum diaphragm operating temperature*** PTFE Santoprene Buna-N TPE Fluoroelastomer Geolast Typical sound level at 70 psi (4.9 bar, 0.
Husky 2150 Metal Pumps Performance Charts Dimensions Husky 2150 Performance A 100 (7, 0.7) A B B C C 80 (5.5, 0.55) 60 (4.1, 0.41) 100 (2.8) 50 (1.4) D 20 (1.4, 0.14) 25 (0.7) D 0 gpm (lpm) 0 20 (76) 40 (152) 60 (227) 80 (303) 100 (379) 120 (454) 140 (531) 160 (606) 1/2 npt(f) Air Inlet 19.37 in (492 mm) 12.3 in (312.5 mm) 3/4 npt(f) Air Exhaust (muffler included) A = at 120 psi (8.4 bar, 0.84 MPa) B = at 100 psi (7 bar, 0.7 MPa) C = at 70 psi (4.8 bar, 0.
Husky 2200 Plastic Pumps Air-Operated Diaphragm Husky 15120Double Plastic Pumps Husky 2200 Selector Tool To order a Husky 2200, use the online selector tool at www.graco.com/process or contact your distributor. PART NO. CONFIGURATION NO. DATE CODE SERIES MAX WPR PSI-bar SERIAL NO. MADE IN Pump ID NOTE: Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Example of Product Selector Tool on www.graco.
Husky 2200 Plastic Pumps Technical Specifications Husky 2200 Pumps Polypropylene PVDF Maximum fluid working pressure Maximum free flow delivery* Maximum pump speed Standard diaphragm Overmolded diaphragm Displacement per cycle** Standard diaphragm Overmolded diaphragm Maximum suction lift (DB2366) Maximum size pumpable solids Maximum operating temperature*** Maximum diaphragm operating temperature*** PTFE PTFE overmolded diaphragm Santoprene Buna-N TPE Fluoroelastomer Geolast Typical sound power at 70 p
Husky 2200 Plastic Pumps Dimensions Center Flange End Flange 24.1 in (61.2 mm) 25.1 in (63.8 mm) 3.6 in (9.1 mm) 3.1 in (7.9 mm) 25.6 in (65.0 mm) 26.3 in (66.8 mm) 12.0 in (30.5 mm) 12.8 in (32.5 mm) 19.8 in (50.3 mm) 18.5 in (47.0 mm) 16.3 in (41.4 mm) 16.3 in (41.4 mm) 7.0 in (17.8 mm) 7.0 in (17.8 mm) 8.2 in (20.8 mm) 31.7 in (80.5 mm) 28.7 in (72.9 mm) 30.3 in (77.0 mm) 27.2 in (69.1 mm) 13.9 in (35.3 mm) 8.2 in (20.8 mm) 13.9 in (35.
Husky 2200 Plastic Pumps Performance Charts Bolt Through Design Husky 2200 Performance Approx. Cycles per Minute FLUID OUTLET PRESSURE psi (bar, MPa) 50 100 (7, 0.69) 75 100 125 140 (4.0) A A B 75 (5.2, 0.52) 175 (5.0) 105 (3.0) B C C 50 (3.4, 0.34) D 70 (2.0) D 25 (1.7, 0.17) AIR CONSUMPTION scfm (m3/min) 25 125 (8.6, 0.86) 35 (1.
Husky 3300 Plastic Pumps Air-Operated Double Diaphragm Husky 3300 Selector Tool To order a Husky 3300, use the online selector tool at www.graco.com/process or contact your distributor. Pump Configuration Number NOTE: Options for seats, check balls, diaphragms, and seals vary. Example of Product Selector Tool on www.graco.
Husky 3300 Plastic Pumps Popular Models Material Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Part Number 652404 652400 652423 652414 652402 Materials for Seats Polypropylene Polypropylene Santoprene Stainless Steel Polypropylene Materials for Balls PTFE Santoprene Santoprene PTFE FKM Materials for Diaphragms 2 pc PTFE Santoprene Santoprene 2 pc PTFE FKM Air Valve Replacement Kit 24K857 24K857 24K857 24K857 24K857 Technical Specifications Husky 3300 Plastic Pumps Polypropylen
Husky 3300 Plastic Pumps Polypropylene Pump Dimensions Dimensions Performance Charts Husky 3300 Performance 29.12 in. (74.0 cm) 34.5 51.7 69.0 86.2 375 (10.6) A 300 (8.5) A 100 (7, 0.69) B B 75 (5.2, 0.52) C C 50 (3.4, 0.34) D 25 (1.7, 0.17) D 225 (6.4) 150 (4.2) 75 (2.1) 14.56 in. (37.0 cm) AIR CONSUMPTION scfm (m3/min) FLUID OUTLET PRESSURE psi (bar, MPa) Approx. Cycles per Minute 17.2 125 (8.6, 0.86) Air Inlet (opposite side from muffler) 26.69 in. (67.8 cm) 0 gpm (lpm) 41.
Husky 3300 Metal Pumps Air-Operated Double Diaphragm Husky 3300 Selector Tool To order a Husky 3300, use the online selector tool at www.graco.com/process or contact your distributor. Pump Configuration Number NOTE: Options for seats, check balls, diaphragms, and seals vary. Example of Product Selector Tool on www.graco.
Husky 3300 Metal Pumps Popular Models Material Aluminum Aluminum Aluminum Aluminum Aluminum Stainless Steel Stainless Steel Part Number 652002 652046 652021 652081 652036 652804 652812 Materials for Seats TPE Geolast Stainless Steel Acetal Santoprene Stainless Steel Santoprene Materials for Balls Acetal Geolast PTFE PTFE Santoprene PTFE Santoprene Materials for Diaphragms TPE Geolast 2 pc PTFE 2 pc PTFE Santoprene 2 pc PTFE Santoprene Air Valve Replacement Kit 24K855 24K855 24K855 24K855 24K855 24K857
Husky 3300 Metal Pumps Performance Charts Husky 3300 Performance 34.5 51.7 69.0 86.2 375 (10.6) A 300 (8.5) A 100 (7, 0.69) B B 75 (5.2, 0.52) C C 50 (3.4, 0.34) D 25 (1.7, 0.17) D 225 (6.4) 150 (4.2) 75 (2.1) 0 gpm (lpm) 0 50 (189) 100 (379) 150 (568) 200 (757) 250 (946) FLUID FLOW (Pump tested in water with inlet submerged) AIR PRESSURE LEGEND A = at 125 psi (8.3 bar, 0.83 MPa) B = at 100 psi (7 bar, 0.7 MPa) C = at 70 psi (4.8 bar, 0.48 MPa) D = at 40 psi (2.8 bar, 0.
Husky 3300 Metal Pumps Aluminum Pump Dimensions Stainless Steel Pump Dimensions Dimensions Stainless Steel Pump Dimensions Aluminum Pump Dimensions Aluminum Stainless Steel 24.08 in. (61.2 cm) 24.68 in. (62.7 cm) 12.34 in. (31.3 cm) 12.04 in. (30.6 cm) Air Inlet (opposite side from muffler) Air Inlet (opposite side from muffler) 23.8 i (60.5 c 27.88 in. (70.8 cm) 32.56 in. (82.7 cm) 24.50 in. 19.38 in. (62.2 cm) 28.63 in. (49.2 cm) (72.7 cm) 19.70 in. (50.0 cm) 4.5 (11.4 4.13 in. (10.
Husky Transfer Pump Packages 55 Gallon (208 liter) Size Ordering Information Pump Components Drum Kit Components Package Number Pump Type Pump Number Seats Balls Diaphragms Drum Kit Number Tube Material Tube Part Number Easy Out Seal and Mounting Base 233051 Husky 515 Polypropylene 241565 Polypropylene PTFE PTFE 233045 Polypropylene 196096 233073 233052 Husky 515 Acetal 241564 Acetal PTFE PTFE 233047 Stainless Steel 196094 233074 233053 Husky 515 Acetal 241564 Acetal PTFE
Husky Transfer Pump Packages Technical Specifications Acetal Husky 515 Polypropylene Husky 515 Maximum fluid working pressure 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa) Maximum free flow delivery* 12 gpm (57 lpm) 12 gpm (57 lpm) 14 gpm (61 lpm) 14 gpm (61 lpm) Maximum pump speed 400 cpm 400 cpm 400 cpm 400 cpm Displacement per cycle** 0.04 gallon (0.15 liter) 0.04 gallon (0.15 liter) 0.04 gallon (0.15 liter) 0.04 gallon (0.
Husky Transfer Pump Packages Pump and Agitator Packages Ordering Information PART NUMBER HUSKY 55 GAL (200 L) DISPENSING PACKAGE 231418 Husky 515 acetal pump 241564, stainless steel drum cover 238283, heavy-duty agitator 238157, air-powered drum cover elevator 237746, air controls, hose and dispense valve 231419 Husky 515 acetal pump, stainless steel drum cover, heavy-duty agitator, drum cover elevator PART NUMBER HUSKY TWISTORK® PACKAGE 238859 Husky 515 D52911 Polypropylene pump mounted on Twistor
Husky Transfer Pump Packages Dimensions Husky 55 gal Dispensing Package Husky Twistork Package 10.7 in (272 mm) Elevator height of unit from base to top of pump when elevator is raised Base Mounting Hole Layout 95 in. (2413 mm) 8.7 in (221 mm) 7.9 in (201 mm) 8.88 in. (225.6 mm) 32 in (813 mm) minimum 5.5 in. (140 mm) 0.56-in. (14.2 mm) holes 10.8 in (274 mm) 61.1 in (1552 mm) 35.1 in (892 mm) maximum 57 in.
Husky Pump Accessories Air-Operated Double Diaphragm Husky 205 Accessories Part Number AIR CONTROLS Regulator / Filter Assembly 1/4” npt(f) (6.35 mm) Quick Connect Air Coupler 1/4” npt (6.35 mm) Quick Connect Air Nipple 1/4” npt (6.35 mm) mbe Air Shut Off Valve 1/4” npt (6.
Husky Pump Accessories Husky 515 and Husky 716 Accessories Part Number AIR CONTROLS Regulator / Filter Assembly 1/4” npt(f) (6.35 mm) Quick Connect Air Coupler 1/4” npt (6.35 mm) Quick Connect Air Nipple 1/4” npt (6.35 mm) mbe Air Shut Off Valve 1/4” npt (6.
Husky Pump Accessories Husky 515 and Husky 716 Accessories (continued) Part Number SURGE SUPPRESSORS (CONTINUED) Stainless Steel (wetted bottom and top housings) with a Buna N bladder with PTFE bellows with a Fluoroelastomer bladder Acetal (wetted bottom and top housings) with a Buna N bladder with PTFE bellows Adjustable Husky 750, 3/4” (19.
Husky Pump Accessories Husky 1050, 1590, 2150 Accessories (continued) Part Number SURGE SUPPRESSORS Surge suppressors are designed to reduce the pulsation caused during pump changeover. The suppressor construction is generally closely matched with the pump’s material (Stainless Steel with Stainless Steel, Acetal with Aluminum, etc.) and are available in either an adjustable or automatic version. See 308703 for details. Automatic Husky 2000, 2 in (50.
Husky Pump Accessories Husky 3300 Accessories AIR CONTROLS Regulator / Filter Assembly 3/4” npt(f) (19.5 mm) Quick Connect Air Coupler 3/4” npt (19.5 mm) Quick Connect Air Nipple 3/4” npt (19.5 mm) mbe Air Shut Off Valve 3/4” npt (19.
EP Series Hose Pumps Positive Displacement Hose Pumps Ordering Information and Technical Specifications 1. Choose your pump speed to meet your flow requirements. 2. Choose your hose and hose barb material to meet your application requirements. Model EP2006 Pump Speed Range 1 Pump Speed @ 60 Hz - rpm Flow Rate @ 10 Hz - gpm (lpm) Flow Rate @ 60 Hz - gpm (lpm) Natural Rubber Hose Nitrile Hose EP3019 EP4029 157:1 (Low) 51.3:1 (Mid) 157:1 (Low) 35.1:1 (Mid) 100.4:1 (Low) 35.9:1 (Mid) 79.
EP Series Hose Pumps Ordering & Mounting Information Hose Pumps with No Motor Drive Fully assembled pumps with customer supplied motor drive Hose Barb Material Hose Material EP2006 EP2013 EP3019 EP4029 Natural Rubber 316 SST 24M739 24M767 24M795 24M820 Nitrile 316 SST 24M742 24M770 24M798 24M823 Hastelloy-C 24M743 24M771 24M799 24M824 EPDM CSM 316 SST 24M735 24M763 24M791 24M816 Hastelloy-C 24M736 24M764 24M792 24M817 316 SST 24M740 24M768 24M796 24M821 Hastelloy-C 2
EP Series Hose Pumps Kits and Replacement Hoses Ordering Information VFDs (Variable Frequency Drives) Hp Input Voltage Output Voltage Used with Pump 0.5 120 or 240 VAC (1 Phase) 240 VAC (3 Phase) Part Number EP2 16K905 0.5 208-240 VAC (1 or 3 Phase) 208-240 VAC (3 Phase) EP2 16K906 1 120 or 240 VAC (1 Phase) 240 VAC (3 Phase) EP2 16K907 1 208-240 VAC (1 or 3 Phase) 208-240 VAC (3 Phase) EP2 16K908 1.5 120 or 240 VAC (1 Phase) 240 VAC (3 Phase) EP2 16K909 1.
EP Series Hose Pumps Dimensions Dimensions EP2 Hose Pumps EP3 Hose Pumps 16.65 in (423 mm) 17.20 in (437 mm) 11.81 in (300 mm) 27.39 in (696 mm) 13.52 in (344 mm) 8.98 in (228 mm) 11.02 in (280 mm) EP4 Hose Pumps 19.35 in (492 mm) 15.91 in (404 mm) 16.86 in (428 mm) 13.35 in (339 mm) 74 PROCESS EQUIPMENT CATALOG 34.
Hydra-Clean® Air-Operated Pressure Washers Ordering Information Wall Mount Hydra-Clean Package Package Order No. 247550 247552 247554 258665 Air Motor Part No. N34DN0 N65DN0 N65DN0 N65DNO Pump Lower Part No.
Hydra-Clean Pressure Washers Technical Specifications Part Number Pump Package Max. Working Pressure psi (bar, MPa) Max. Air Input Pressure psi (bar, MPa) Fluid Flow at 60 cpm gpm (lpm) Vol. per Cycle oz (cc) Air Inlet Size Fluid Inlet Size Fluid Outlet Size* 247549 12:1 Cart Mount 1250 (86, 8.6) 100 (7, 0.7) 8.7 (33.0) 18.6 (550) 3/4 npt(f) 1 in 3/8 in 247550 12:1 Wall Mount 1250 (86, 8.6) 100 (7, 0.7) 8.7 (33.0) 18.
Hydra-Clean Pressure Washers Dimensions Cart Mount Package 247549 Wall Mount Package 247550 17.8 in (452 mm) 44.3 in (1125 mm) 50.0 in (1270 mm) 30.8 in (782 mm) 17.1 in (434 mm) 17.1 in (434 mm) 5.6 in (142 mm) Refer to manual 312585 for additional package dimensions 25.
CycleFlo™ and CycleFlo II Solenoid Pump Controllers Ordering Information 195264 196706 195265 309003 309004 CycleFlo Pneumatic pump controller, 120V CycleFlo Pneumatic pump controller, 240V CycleFlo II Pneumatic pump controller, 120V CycleFlo Instruction Manual CycleFlo II Instruction Manual Product Selector Highlighted areas indicate the different sizes of remote pumps and available materials of construction for seats, balls and diaphragms that can be used with the CycleFlo and CycleFlo II controlle
CycleFlo and CycleFlo II How To Determine The Best Remote Pump: 1. Configure the best seat, ball and diaphragm combination, as well as fluid wetted parts, based on material compatibility and application requirements. • If the material is a mild acid, the choice could be a DX2911. 2. Determine dispense time and volume accuracy. • In two minutes, 50 gallons need to be dispensed ±5% accuracy 3.
Fast-Flo® 1:1 Air-Operated Piston Transfer Pumps Ordering Information Technical Specifications PART NUMBER CONSTRUCTION PACKING 226940 Drum/CS/SST (ETL-UL, CE) T&L 226941 Drum/CS/SST (ETL-UL, CE) PE 226942 Drum/SST (ETL-UL, CE) PE 226943 Stubby/CS/SST (ETL-UL, CE) L 226944 Stubby/CS/SST (ETL-UL, CE) PE 226945 Stubby/SST (ETL-UL, CE) PE 226946 Drum/CS/SST (CE) T 237129 Drum/SST (CE) T 237130 Stubby/CS (CE) L 237131 Stubby/CS (CE) T 237132 Stubby/SST (CE) T 237133 Drum/C
Piston Pumps for Ink Applications Ink Applications Ordering Information and Technical Specifications Piston Pumps with Sealed Wet Cup Ink Pump Package Part No. Ratio 258744 14:1 258745 14:1 258746 14:1 258747 23:1 258748 23:1 258749 23:1 258750 26:1 258751 26:1 258752 26:1 258753 1.6:1 Remote DataTrak DataTrak x x x x x x Power Source Maximum Air or Hydraulic Input Displacement Pressure psi (MPa, bar) per Cycle Maximum Fluid Working Pressure psi (MPa, bar) Air 500 cc 100 (0.7, 7.
Piston Pumps for Ink Applications Ordering Information and Technical Specifications Name of Pump Senator® 19:1 Viscount® II 1900 Bulldog® 31:1 Viscount II 3100 Lower size Maximum fluid pressure Maximum motor inlet pressure Flow rate @ 60 cpm Cfm or gpm required per gallon Fluid pump outlet size Motor inlet size Weight of pump Instruction manual 800 1900 psi (131 bar, 13.1 MPa) 100 psi (air) (6.9 bar, 0.69 MPa) 2.8 gpm (10.
Piston Pumps for Ink Applications Name of Pump Bulldog 12:1 Viscount II 1200 King® 24:1 Viscount II 2400 Lower size Maximum fluid pressure Maximum motor inlet pressure Flow rate @ 60 cpm Cfm or gpm required per gallon Fluid pump outlet size Motor inlet size Weight of pump Instruction manual 2100 1200 psi (82.8 bar, 8.28 MPa) 100 psi (air) (6.9 bar, 0.69 MPa) 7.5 gpm (28.4 lpm) 20 cfm 1-1/2” npt (m) 3/4” npt (f) 142 lb (65 kg) 308149 2100 1200 psi (82.8 bar, 8.28 MPa) 750 psi (oil) (51.7 bar, 5.
Piston Pumps for Ink Applications Ordering Information and Technical Specifications Piston Pumps President® 20:1 Lower size Maximum fluid pressure Maximum motor inlet pressure Flow rate @ 60 cpm Cfm or gpm required per gallon Fluid pump outlet size Motor inlet size Weight of pump Instruction manual 450 2000 psi (140 bar. 14 MPa) 100 psi ( 7 bar, 0.7 MPa) 1.2 gpm (4.5 lpm) 35 cfm 3/4” npt (f) 1/2” npt (f) 50 lb (22.
Surge Suppressors Husky 750 and Husky 2000 Ordering Information Husky 750, 3/4 in npt(f) Surge Suppressors Automatic wetted bottom housing and non-wetted top housing Polypropylene Stainless Steel Weight Suppressor with Buna-N bladder Suppressor with PTFE bellows Suppressor with Fluoroelastomer bladder 9 lb (4.1 kg) 239096 239121 239122 16 lb (7.
Notes 86 PROCESS EQUIPMENT CATALOG
Notes PROCESS EQUIPMENT CATALOG 87
Notes 88 PROCESS EQUIPMENT CATALOG
Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service.